
2026 STM32
waterloo-rocketry/electrical_tutorials
Hardware & software used in electrical tutorials

Hardware & software used in electrical tutorials
Ee tut is an open-source printed circuit board by waterloo-rocketry, from the waterloo-rocketry/electrical_tutorials repository on GitHub. It is a 2-layer board of 41.4 × 36.3 mm with 16 parts on 12 nets, routed with 91 tracks and 6 vias.
It is built around the PIC16LF15313-E/P. Its parts include 5 resistors, 3 switches, 2 diodes, 1 capacitor and 1 IC. It belongs with the PIC boards of this library.
Hardware & software used in electrical tutorials
Contents:
picdev board (see schematics in canhw). The project is set up with all the necessary files to get CAN communication up and running.| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 200R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | Battery_Holder | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LOGO | new_lib:Logo_SilkScreen_10mm | G*** |
| 1 | PIC16LF15313 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Programming_Connector | new_lib:PinHeader_5x2.54_SMD_90deg_952-3198-1-ND | J1 |
| 1 | SW_SPST | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW3 |

waterloo-rocketry/electrical_tutorials
Hardware & software used in electrical tutorials

waterloo-rocketry/electrical_tutorials
Hardware & software used in electrical tutorials

rasteri/TAStable
Many consoles - ones that drive their logic synchronously from a single master clock - behave more-or-less identically each time they are reset, and so are relatively simple to design speedruns for.

JuergenMH/diver_led_tools
This repository contains two procjects. The first one is a LED "Diver marker" and the second one is "Diver flasher". Both devices are tools for scuba drivers.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 41.4 × 36.3 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the PIC16LF15313-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the waterloo-rocketry/electrical_tutorials repository on GitHub, at the commit this page was made from: the board is 2020_keychain_PIC/ee_tut/ee_tut.kicad_pcb and its schematic 2022_generic/2022_generic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask waterloo-rocketry before reusing the design.