
LED Marker
JuergenMH/diver_led_tools
This repository contains two procjects. The first one is a LED "Diver marker" and the second one is "Diver flasher". Both devices are tools for scuba drivers.

This repository contains two procjects. The first one is a LED "Diver marker" and the second one is "Diver flasher". Both devices are tools for scuba drivers.
LED Flasher is an open-source printed circuit board by JuergenMH, from the JuergenMH/diver_led_tools repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 105 × 24 mm with 30 parts on 16 nets, routed with 174 tracks and 30 vias.
It is built around the PIC16LF15313-E/P, BAV16W and DMT6009LCT. Its parts include 7 capacitors, 6 resistors, 4 diodes, 2 inductors and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) and PIC boards of this library.
This repository contains two projects or units.
The first one is a LED "Diver marker" and the second one is "Diver flasher". Both devices are tools for scuba drivers. It shares some ressources, this was the reason to put them into one repository.
2D drawings: brainstorming folder with ideas how to create possible water proofed housings for the diver marker/flasher.
documents: different documents regarding both units.
Firmware_diver_flasher: currently a copy of an older project which will be the base for the new software
FIrmware_diver_marker: ditto
Pcb_Diver_Marker: Eagle (7.6) PCB for this unit
Pcb_Diver_Flasher: KiCAD (8.0) PCB for this unit
SKEDD-PIC-Cable: KiCAD (8.0) schematic for the connection cable PICKIT <> PCB for program and debug purposesThe folder structures and content are still under construction!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP101, TP102, TP103, TP104, TP105, TP106 |
| 4 | 100µF/16V | Capacitor_SMD:CP_Elec_6.3x5.8 | C103, C104, C107, C108 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C102, C105, C106 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R101, R106 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R102, R104 |
| 2 | 33µH | Inductor_SMD:L_12x12mm_H8mm | L101, L102 |
| 2 | LB-P200W2C-H3 | MyLED:LPB200XX | D103, D104 |
| 1 | 1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R103 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R105 |
| 1 | BAV16W | Diode_SMD:D_SOD-123 | D101 |
| 1 | DMT6009LCT | Package_TO_SOT_THT:TO-220-3_Vertical | T101 |
| 1 | KEYSTONE Battery Holder 1042 | Battery:BatteryHolder_Keystone_1042_1x18650 | BAT101 |
| 1 | MK15-C2 | MyReed:Meder MK15-C-2 | SW101 |
| 1 | PIC16LF15313 | Package_SO:SSOP-8_3.9x5.05mm_P1.27mm | IC101 |
| 1 | SKEDD6 | MySkedd:SKEDD-6 | J101 |
| 1 | SL42 | Diode_SMD:D_SMC_Handsoldering | D102 |

JuergenMH/diver_led_tools
This repository contains two procjects. The first one is a LED "Diver marker" and the second one is "Diver flasher". Both devices are tools for scuba drivers.

rasteri/TAStable
Many consoles - ones that drive their logic synchronously from a single master clock - behave more-or-less identically each time they are reset, and so are relatively simple to design speedruns for.

WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project

reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad

waterloo-rocketry/electrical_tutorials
Hardware & software used in electrical tutorials



FontysMinorAR/LevelShifter
This is an application for the Arduino Nano to test the Level shifter Board

JKattackk/JKattPad-ATM32u2
Custom numpad using ATMega32u2, QMK, and USB-C connectivity
It measures 105 × 24 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the PIC16LF15313-E/P, BAV16W and DMT6009LCT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JuergenMH/diver_led_tools repository on GitHub, at the commit this page was made from: the board is DiverFlasher/pcb/LED_Flasher.kicad_pcb and its schematic DiverFlasher/pcb/LED_Flasher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).