

KeypadV2-compact
Custom numpad using ATMega32u2, QMK, and USB-C connectivity
- Size
- 108.8 × 118.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 64
- Pads
- 332
- Tracks, vias
- 628, 69
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Sep 2025
- Updated
- 2 Jan 2026
Overview
KeypadV2-compact is an open-source printed circuit board by JKattackk, from the JKattackk/JKattPad-ATM32u2 repository on GitHub. It is a 2-layer board of 108.8 × 118.3 mm with 70 parts on 64 nets, routed with 628 tracks and 69 vias.
It is built around the ATMEGA32U2-AU, USBLC6-2SC6 and BAV16W. Its parts include 27 switches, 26 diodes, 6 resistors, 5 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U2-AU
TQFP-32(7x7)-40℃~+85℃ 16MHz 1KB 1KB 2.7V~5.5V 22 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BAV16W
SOD-123-55℃~+150℃ 1 Independent 1.25V@150mA 1uA@75V 2A 300mA 85V SOD-123 Diodes - General Purpose ROHSDiodes IncorporatedDiodes - General Purpose
README
README.mdJKattPad-ATM32u2
Custom numpad using ATMega32u2, QMK, and USB-C connectivity
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | BAV16W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +10 |
| 23 | ~ | alpsMX:MX-Alps-Hybrid-1U | S1, S10, S11, S12, S13, S14, S15, S16, S17, S18, S21, S22, S23, S24, S25, S26 +7 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | ~ | alpsMX:MX-Alps-Hybrid-2U-nostab | S2, S20 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 16MHz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | ATmega32U2-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 1 | USB4085-GF-A_REVB | usbCthroughhole:GCT_USB4085-GF-A_REVB | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | ~ | alpsMX:MX-Alps-Hybrid-2U-Vertical-nostab | S19 |
Similar boards
- 2 layers74.2 × 124.6 mm

- 2 layers274 × 158 mm

Acacia
jpsecher/keyboards
Goals - Good ergonomics - Good for programming - No drivers - Configurable - Use standard components where possible
127 parts1ISC - 2 layers81.3 × 100.3 mm

- 2 layers77.2 × 123.1 mm

- 2 layers242.2 × 72.1 mm

- 2 layers87.2 × 59 mm

Reform2-trackball
jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.
47 parts1 - 2 layers94.5 × 228 mm

- 2 layers105.1 × 55.3 mm

Questions
How big is the KeypadV2-compact PCB?
It measures 108.8 × 118.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KeypadV2-compact use?
70 parts, built around the ATMEGA32U2-AU, USBLC6-2SC6 and BAV16W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KeypadV2-compact KiCad files?
From the JKattackk/JKattPad-ATM32u2 repository on GitHub, at the commit this page was made from: the board is KiCad/AT32u2-V1/keypadV2-compact.kicad_pcb and its schematic KiCad/AT32u2-V1/keypadV2-compact.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KeypadV2-compact design in my own project?
Its repository states no licence, so its author keeps all rights: ask JKattackk before reusing the design.