2 layers79 × 30 mm
LIA
JGAguado/LIA
Low-power pet tracking platform built around Meshtastic and LoRa mesh networking
81 parts29
2 layers88 × 72.7 mm
Meshbot kicad v1
waterbearfieldschool/mesh-bot- Size
- 88 × 72.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 44
- Pads
- 165
- Tracks, vias
- 578, 164
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Jun 2025
- Updated
- 12 Jul 2025
Overview
Meshbot kicad v1 is an open-source printed circuit board by waterbearfieldschool, from the waterbearfieldschool/mesh-bot repository on GitHub. It is a 2-layer board of 88 × 72.7 mm with 37 parts on 44 nets, routed with 578 tracks and 164 vias.
It is built around the WIO-SX1262. Its parts include 12 connectors, 8 switches, 7 resistors, 5 ICs and 1 diode. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdmesh-bot
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 7 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4, R5, R6, R7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11, J12 |
| 2 | Conn_01x04_Pin | footprints:ssd1306_a | J3, J5 |
| 2 | nice_nano_clean | footprints:nice_nano_cleanest | U2, U3 |
| 1 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x02_Socket | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | J9 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x03_Socket | footprints:usual_switch | J8 |
| 1 | Conn_01x04_Pin | footprints:gps_ublox_blue | J2 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J13 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J7 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J6 |
| 1 | grove_a | footprints:grove_rightangle | U5 |
| 1 | grove_a | footprints:grove_a | U4 |
| 1 | wio-sx1262 | wio-sx1262:wio-sx1262 | U1 |
Questions
How big is the Meshbot kicad v1 PCB?
It measures 88 × 72.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Meshbot kicad v1 use?
37 parts, built around the WIO-SX1262. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Meshbot kicad v1 KiCad files?
From the waterbearfieldschool/mesh-bot repository on GitHub, at the commit this page was made from: the board is v1/hardware/meshbot_kicad_v1/meshbot_kicad_v1.kicad_pcb and its schematic v1/hardware/meshbot_kicad_v1/meshbot_kicad_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Meshbot kicad v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask waterbearfieldschool before reusing the design.
Similar boards
- 4 layers42.5 × 32 mm
- 2 layers50 × 60 mm
- 2 layers40 × 50 mm
Sensor Station
BeeEyeIoT/sensor-station-board
Complete KiCAD project for a sensor data collection station
39 parts - 6 layers43 × 82.4 mm
Cmd z5
befinitiv/cmd-z5-pager
Replacement PCB & Software to turn Sony CMD-Z5 into a Meshtastic/Lorawan pager
120 parts - 2 layers79.3 × 46.4 mm
Rook
edgecollective/rook
Rook is an open hardware radio board from Edge Collective. It is built for nodes that sit outdoors on a battery and keep working: mesh repeaters, remote sensors, and anything else that needs to send data a long way…
51 parts - 2 layers65.5 × 30.3 mm
LoraHat
joaouzeda/LoRa-Esp32_RaspbeeryPi0W_Hat
Project Description An Esp32 with LoRa to connect with a Raspberry Pi Zero W using serial Pins.
9 parts - 2 layers17.8 × 21.4 mm
Seeed xiao esp32s3-expander
lucg/seeed-xiao-esp32s3-expander
An expansion board for the Seeed Studio XIAO ESP32-S3 (Plus) using the B2B connector
15 partsCC-BY-SA-4.0