
Net bmp
elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)

Replacement PCB & Software to turn Sony CMD-Z5 into a Meshtastic/Lorawan pager
Cmd z5 is an open-source printed circuit board by befinitiv, from the befinitiv/cmd-z5-pager repository on GitHub. It is a 6-layer board of 43 × 82.4 mm with 120 parts on 128 nets, routed with 1,519 tracks and 268 vias.
It is built around the WIO-SX1262, NRF52840-QIAA-R and PAM8302AASCR, with the TLV9001IDCKR-MS, USBLC6-2SC6 and NPM1300-QEAA-R7 among its other parts. Its parts include 54 capacitors, 30 resistors, 8 ICs, 8 connectors and 7 diodes. It belongs with the radio and wireless boards and the nRF52 and nRF5x boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C14, C15, C16, C17, C31, C34, C41, C43, C44, C46, C53 |
| 11 | 10u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C33, C37, C38, C39, C45, C49 |
| 10 | 1u | Capacitor_SMD:C_0402_1005Metric | C2, C10, C11, C13, C19, C32, C40, C47, C50, C52 |
| 8 | 100k | Resistor_SMD:R_0402_1005Metric | R14, R15, R16, R17, R21, R22, R23, R26 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric | R2, R3, R6, R12 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R18, R19, R25 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R27, R28, R29, R30 |
| 4 | DNP | Capacitor_SMD:C_0402_1005Metric | C29, C30, C35, C36 |
| 4 | green | LED_SMD:LED_0603_1608Metric | D4, D5, D6, D7 |
| 3 | 10M | Resistor_SMD:R_0402_1005Metric | R9, R10, R11 |
| 3 | 2.2u | Inductor_SMD:L_0805_2012Metric | L1, L2, L6 |
| 3 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C12, C21, C51 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C42, C54 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C23, C24 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D2, D3 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R20, R24 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 8.2p | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | GT-BTP30002-0500B-015A | cmd-z5:BAT-SMD_2P-P3.00_G-Switch_GT-BTP30002-0500B-015A | J2, J7 |
| 1 | 0.5p | Capacitor_SMD:C_0402_1005Metric | C28 |
| 1 | 0.8p | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 10u | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 150k 1% | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 15n | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 2450AT18A100E | RF_Antenna:Johanson_2450AT18x100 | AE1 |
| 1 | 32 MHz CL=10pF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768 kHz CL=7pF | cmd-z5:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | 330p | Capacitor_SMD:C_0402_1005Metric | C48 |
| 1 | 4.7n | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | Battery header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Capsule mic (original) | cmd-z5:MIC_Contact_Concentric_D6.2mm | MK1 |
| 1 | DMG1016UDW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q2 |
| 1 | DMG1024UV | Package_TO_SOT_SMD:SOT-563 | Q1 |
| 1 | KH-FPC0.5-H1.0SMT-26P-QCHF | cmd-z5:FPC-SMD_26P-P0.50_KH-FPC0.5-H1.0SMT-26P-QCHF | J5 |
| 1 | KH-FPC0.5-H1.0SMT-28P-QCHF | cmd-z5:FPC-SMD_28P-P0.50_KH-FPC0.5-H1.0SMT-28P-QCHF | J6 |
| 1 | LIS2DH12TR | Package_LGA:LGA-12_2x2mm_P0.5mm | U4 |
| 1 | PAM8302AASCR | Package_SO:MSOP-8_3x3mm_P0.65mm | U7 |
| 1 | PCB antenna 868/915 MHz | cmd-z5:Texas_SWRA416_868MHz_915MHz_Mirrored | AE2 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | TBS M10N | cmd-z5:SolderPads_1x04_P2.00mm_SMD | J4 |
| 1 | TLV9001IDCKR | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U8 |
| 1 | TPS610997YFFR | cmd-z5:Texas_DSBGA-6_0.855x1.255mm_Layout2x3_P0.4mm_LevelB | U6 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | Wio-SX1262 | cmd-z5:Seeed_Wio-SX1262 | U5 |
| 1 | nPM1300-QEAA-R7 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U2 |
| 1 | nRF52840-QIAA-R | Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U3 |
It measures 43 × 82.4 mm and has 6 copper layers, 0.8 mm thick.
120 parts, built around the WIO-SX1262, NRF52840-QIAA-R, PAM8302AASCR and TLV9001IDCKR-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the befinitiv/cmd-z5-pager repository on GitHub, at the commit this page was made from: the board is board/kicad/cmd-z5.kicad_pcb and its schematic board/kicad/cmd-z5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask befinitiv before reusing the design.

elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)


BrownSpaceEngineering/PVDX-ADCS-PMB
Avionics files related to ADCS and Perovskite schematics, pcb design, and documentation



fire-h0und/FlatPort
Teensy 2.0 Risc-V dropin Arduino promicro lookalike with special features


dyu134/ESP-HI-PLUS
The Robot sub-module is a high-performance actuator and sensing expansion board for the ESP-HI-PLUS, designed to transform the device into a mobile or interactive robotic platform.