6 layers41.8 × 42 mm
2 layers18 × 27 mm
TinyESP32Cam
wasa-rockoon/TinyESP32Cam- Size
- 18 × 27 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 58
- Nets
- 90
- Pads
- 243
- Tracks, vias
- 432, 43
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Oct 2023
- Updated
- 14 Oct 2023
Overview
TinyESP32Cam is an open-source printed circuit board by wasa-rockoon, from the wasa-rockoon/TinyESP32Cam repository on GitHub. It is a 2-layer board of 18 × 27 mm with 58 parts on 90 nets, routed with 432 tracks and 43 vias.
It is built around the ESP32-S3, ESD9B5.0ST5G and ASMB-MTB1-0A3A2. Its parts include 18 capacitors, 16 resistors, 4 ICs, 4 diodes and 4 inductors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
3
ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
ESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
ASMB-MTB1-0A3A2
SMD3528-4P-40℃~+100℃ 115° B:2.8V~3.6V、G:2.8V~3.6V、R:1.8V~2.6V Common Anode G:90mW、B:90mW、R:65mW R:20mA、G:20mA、B:20mA R:450mcd~900mcd、G:1125mcd~2240mcd、B:285mcd~560mcd R:619.0nm~629.0nm、G:525.0nm~535.0nm、B:465.0nm~473.0nm R:634.0nm、G:522.0nm、B:465.0nm Top-mount White Lens SMD3528-4P RGB LEDs ROHSBroadcom LimitedRGB LEDs
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C8, C10, C11, C12, C13 |
| 4 | 10µF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R14, R15, R16 |
| 4 | 4.7k | Resistor_SMD:R_0402_1005Metric | R8, R9, R12, R13 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C14, C18 |
| 3 | 3.3uH | Inductor_SMD:L_Murata_LQH2MCNxxxx02_2.0x1.6mm | L1, L2, L3 |
| 3 | ESD9B5.0ST5G | Diode_SMD:D_SOD-523 | D2, D3, D4 |
| 3 | LTC3406ES5 | Package_TO_SOT_SMD:TSOT-23-5 | U2, U3, U4 |
| 2 | 51k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | C_Small | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 1µF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 3.3µH | Inductor_SMD:L_Murata_LQH2MCNxxxx02_2.0x1.6mm | L4 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | ASMB-MTB1-0A3A2 | LED_SMD:LED_Cree-PLCC4_2x2mm_CW | D1 |
| 1 | Conn_01x24_Socket | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U1 |
| 1 | LOGO | LOGO | |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | Q_PNP_BEC | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_KXT3 | SW1 |
| 1 | TYPE-C 16PFS 2JCB0.8-H7.45 IPX8 | Library:USB-C-SMD_SHOUHAN_TYPE-C-16PFS-2JCB0.8-H7.45 | J1 |
The 53 most common of 58 parts.
Questions
How big is the TinyESP32Cam PCB?
It measures 18 × 27 mm and has 2 copper layers, 1 mm thick.
What parts does the TinyESP32Cam use?
58 parts, built around the ESP32-S3, ESD9B5.0ST5G and ASMB-MTB1-0A3A2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinyESP32Cam KiCad files?
From the wasa-rockoon/TinyESP32Cam repository on GitHub, at the commit this page was made from: the board is hardware/TinyESP32Cam.kicad_pcb and its schematic hardware/TinyESP32Cam.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinyESP32Cam design in my own project?
Its repository states no licence, so its author keeps all rights: ask wasa-rockoon before reusing the design.
Similar boards
- 4 layers
- 2 layers110.7 × 109.2 mm
ESP32S3R8 XR GL
Supriya648/ESP32-S3-XR-Glasses-PCB
Custom PCB with ESP32-S3 camera module for AI/XR glasses
80 parts - 4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0 - 4 layers58 × 135 mm
Oculink to pcie adapter
antmicro/oculink-pcie-adapter
PCB design which converts an OCuLink connector into x16 PCIe slot
165 parts22Apache-2.0 - 8 layers227.5 × 104 mm
Com express-7-baseboard
antmicro/com-express-7-baseboard
This project contains open hardware design files for a baseboard supporting COM Express 7 modules. The board breaks-out major communications and peripheral interfaces provided by the standard.
815 parts12Apache-2.0 - 4 layers58.4 × 22.9 mm
Quickfeather board
antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.
101 parts6CC-BY-SA-4.0 - 2 layers31.2 × 17.1 mm
Knox Key Kicad
Kingdragoncat/Knox-Key
Knox Key is a high-performance, open-source hardware authenticator designed for secure digital identity and cryptographic operations.
29 parts5