
Motor Control
WardBenjamin/RBE2002_SpiderwebPCB
Spiderweb signal/power routing PCB for WPI RBE 2002 (D19). See https://github.com/WPIRoboticsEngineering/RobotInterfaceBoard

Spiderweb signal/power routing PCB for WPI RBE 2002 (D19). See https://github.com/WPIRoboticsEngineering/RobotInterfaceBoard
Spiderweb is an open-source printed circuit board by WardBenjamin, from the WardBenjamin/RBE2002_SpiderwebPCB repository on GitHub. It is a 2-layer board of 66 × 50.8 mm with 14 parts on 37 nets, routed with 201 tracks and 37 vias.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x19_Female | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J3, J4, J5, J6, J7, J8 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 2 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J1, J2 |

WardBenjamin/RBE2002_SpiderwebPCB
Spiderweb signal/power routing PCB for WPI RBE 2002 (D19). See https://github.com/WPIRoboticsEngineering/RobotInterfaceBoard

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 66 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WardBenjamin/RBE2002_SpiderwebPCB repository on GitHub, at the commit this page was made from: the board is Spiderweb_RIB_Shield/Spiderweb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask WardBenjamin before reusing the design.