

Inverter
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 21
- Pads
- 81
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jul 2025
- Updated
- 12 Jul 2025
Overview
Inverter is an open-source printed circuit board by wangga03, from the wangga03/PCB repository on GitHub. It is a 2-layer board with 30 parts on 21 nets.
It is built around the FR107G and IRF3205. Its parts include 12 resistors, 8 diodes, 4 transistors, 3 connectors and 1 IC. It belongs with the power boards of this library.
Main components
2README
README.mdPCB
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R4, R6, R8, R12 |
| 4 | 1N4148 | 1N4148:DIOAD753W49L380D172B | D1, D2, D3, D4 |
| 4 | 4.7K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R3, R5, R7 |
| 4 | FR107G | FR107G:DIOAD1036W78L470D235 | D5, D6, D7, D8 |
| 4 | IRF3205 | IRF3205:TO254P1041X444X2933-3 | Q1, Q2, Q3, Q4 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2, J3 |
| 1 | 0.01 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R9 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R11 |
| 1 | EGS002 | EGS002:EGS002 | M1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | PTN24A-A5025DB | PTN24A-A5025DB:TRIM_PTN24A-A5025DB | R10 |
| 1 | Thermistor_NTC | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | TH1 |
More from wangga03/PCB
4- 2 layers77.1 × 113.7 mm

- 4 layers69.6 × 53.8 mm

- 2 layers30.5 × 69.8 mm

- 2 layers142.5 × 79.3 mm

Similar boards
- 2 layers77.7 × 73.2 mm

BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
40 parts22GPL-3.0 - 2 layers50.2 × 73 mm

- 2 layers98.8 × 55.1 mm

H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers90 × 44 mm

- 2 layers80 × 100 mm

- 4 layers104.1 × 132.6 mm

- 2 layers92.6 × 52 mm

SineWaveInverter
ampnics/Project-10
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing
44 parts2 - 2 layers65 × 30 mm

Questions
What parts does the Inverter use?
30 parts, built around the FR107G and IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Inverter KiCad files?
From the wangga03/PCB repository on GitHub, at the commit this page was made from: the board is Inverter/Inverter.kicad_pcb and its schematic CapstoneDesign/CapstoneDesign.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Inverter design in my own project?
Its repository states no licence, so its author keeps all rights: ask wangga03 before reusing the design.