
Usb3-ngff carrier
themainframe/5g-m2-usb3-interface-pcb
KiCad EDA Project for my 5G M.2 (NGFF) USB3 Interface board

FPGA based single PCB frontpanel and module for modular synthesis.
Europa is an open-source printed circuit board by wakass, from the wakass/europa repository on GitHub. It is a 2-layer board of 40.3 × 128.5 mm with 20 parts on 43 nets, routed with 71 tracks and 1 via.
It is built around the KMR221GLFS. Its parts include 4 resistors, 2 diodes and 2 connectors. It belongs with the fPGA and programmable logic boards of this library.
A single PCB eurorack module which doubles as its own front-panel and has an FPGA powering it.
For now it is based on the UPduino formfactor, but considering the feather formfactor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 12k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R4 |
| 3 | 5k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | BALL, SWING, TARGET |
| 3 | AudioJack2_Ground | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | 1N_ONE, J5, J6 |
| 3 | KMR2 | josh-buttons-switches:SW_Push_KMR2 | OBSTAIN, PING, THWART |
| 2 | 3.3V | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | AudioJack2 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | IN_ZER0 |
| 1 | Left | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J1 |
| 1 | Right | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J2 |
| 1 | Val** | Atlab:Europe_Graphics | Ref** |
The 19 most common of 20 parts.

themainframe/5g-m2-usb3-interface-pcb
KiCad EDA Project for my 5G M.2 (NGFF) USB3 Interface board

ErichStyger/McuLink-Mini
Version of the NXP MCU-Link Debug CMSIS-DAP Debug Probe.

ErichStyger/MCU-Link-MR
Open Source MCU-Link CMSIS-DAP Debug probe for mobile robots (e.g. Pixhawk)

themainframe/p3-cellular-module
CAD/CAM for a GPD Pocket 3 Cellular Module




It measures 40.3 × 128.5 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the KMR221GLFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wakass/europa repository on GitHub, at the commit this page was made from: the board is hardware/europa.kicad_pcb and its schematic hardware/europa.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wakass before reusing the design.