4 layers33 × 26 mm
4 layers33 × 26 mm
Tire sensor oshpark
wadetb/tire-sensor2BLE tire pressure+temp sensor
- Size
- 33 × 26 mm
- Copper layers
- 4
- Thickness
- 1.4 mm
- Parts
- 40
- Nets
- 57
- Pads
- 182
- Tracks, vias
- 221, 89
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Jul 2025
- Updated
- 19 Jan 2026
Overview
Tire sensor oshpark is an open-source printed circuit board by wadetb, from the wadetb/tire-sensor repository on GitHub. It is a 4-layer board of 33 × 26 mm with 40 parts on 57 nets, routed with 221 tracks and 89 vias.
It is built around the DPS368. Its parts include 19 capacitors, 6 resistors, 5 diodes, 3 ICs and 2 crystals. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdTire Sensor
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | PCM_JLCPCB:C_0402 | C4, C5, C8, C16, C17, C18 |
| 6 | 12pF | PCM_JLCPCB:C_0402 | C1, C2, C11, C12, C13, C14 |
| 5 | 1kΩ | PCM_JLCPCB:R_0402 | R1, R2, R3, R4, R5 |
| 5 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 1 | 0.8pf | PCM_JLCPCB:C_0402 | C3 |
| 1 | 1.0uF | PCM_JLCPCB:C_0603 | C10 |
| 1 | 100pF | PCM_JLCPCB:C_0402 | C7 |
| 1 | 10kΩ | PCM_JLCPCB:R_0402 | R6 |
| 1 | 10uF | PCM_JLCPCB:C_0402 | C19 |
| 1 | 3.9nH | PCM_JLCPCB:L_0402 | L1 |
| 1 | 32.768kHz | PCM_JLCPCB:FC-135R_L3.2-W1.5 | X2 |
| 1 | 32MHz | PCM_JLCPCB:OSC-SMD_4P-L3.2-W2.5-BL_SIT8008BI | X1 |
| 1 | 4.7uF | PCM_JLCPCB:C_0603 | C9 |
| 1 | 47uF | PCM_JLCPCB:C_0805 | C15 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Renata_SMTU2032-LF_1x2032 | BT1 |
| 1 | Conn_02x05_Odd_Even | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | DPS368 | footprints:LGA8S145X65P2X4_200X250X110-V | U2 |
| 1 | LIS3DHTR | footprints:XDCR_LIS3DHTR | U3 |
| 1 | N.C. | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | Tactile Button, 160gf | PCM_JLCPCB:SW_TS-1088-AR02016 | S1 |
| 1 | ~ | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm_ThermalVias | U1 |
More from wadetb/tire-sensor
1Similar boards
- 4 layers50 × 65 mm
FeroFlyF405
Ozonised/FeroFlyF405
FeroFlyF405 an open source STM32F405 based flight controller running INAV
150 parts44CERN-OHL-P-2.0 - 6 layers100 × 37 mm
PickleRick
icl-rocketry/Ricardo-PickleRick
A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.
223 parts2MIT - 2 layers100 × 100 mm
- 2 layers47 × 33 mm
- 4 layers60.7 × 40 mm
Ricardo Crosshair
icl-rocketry/Ricardo-Crosshair
Reefing plastic fibre line cutter (recovery) board.
169 parts - 2 layers60 × 77.7 mm
- 4 layers70 × 70 mm
Windsensor
kristofkatzenberger/windsensor
This repository contains the design files for a portable wind sensor developed in 2025/26 at the University of Applied Sciences Technikum Wien. This project was completed as part of the Bachelor's Thesis:
128 partsMIT - 6 layers26 × 56.8 mm
Bluebuzz rm2
sequoia-hope/bluebuzz
A Bluetooth vibrator controller: RP2350A + Raspberry Pi Radio Module 2 (the first board, an nRF52840 module, is abandoned and kept in archive/nrf52840/): Wi-Fi 4 and Bluetooth 5.2 Classic + LE (CYW43439), so the toy can…
109 parts
Questions
How big is the Tire sensor oshpark PCB?
It measures 33 × 26 mm and has 4 copper layers, 1.4 mm thick.
What parts does the Tire sensor oshpark use?
40 parts, built around the DPS368. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tire sensor oshpark KiCad files?
From the wadetb/tire-sensor repository on GitHub, at the commit this page was made from: the board is tire_sensor_oshpark/tire_sensor_oshpark.kicad_pcb and its schematic tire_sensor_jlcpcb/tire_sensor_jlcpcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tire sensor oshpark design in my own project?
Its repository states no licence, so its author keeps all rights: ask wadetb before reusing the design.