
Racing Hub
wa2ab1/KoiPad
17 Key Custom PCB numberpad with Unique Koi shaped Case and Volume Knob. Built for Hack Club Fallout!

17 Key Custom PCB numberpad with Unique Koi shaped Case and Volume Knob. Built for Hack Club Fallout!
Tech Keyboard is an open-source printed circuit board by wa2ab1, from the wa2ab1/KoiPad repository on GitHub. It is a 2-layer board of 80.2 × 174.6 mm with 49 parts on 31 nets, routed with 137 tracks and 6 vias.
Its parts include 18 switches, 17 diodes and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
KoiPad is an external numpad companion with a large rotary encoder, designed for a fun desk setup with fast numeric input.
With its large 4 cm rotary encoder shaped like its eyeball and a USB-C cable inpsired by a fishing line, KoiPad adds a playful companion to your desk.
KoiPad was inspired by the koi shape from Hack Club's Fallout, and I wanted to turn that into something more unique than a typical macropad. When brainstorming case ideas, the ideas for the usb-c cable to be the fishing line at its mouth and the giant knob for its eye made the whole case concept click into place. With my current keyboard being a TKL layout, I also wanted a dedicated numpad which will help improve my number crunching.
3D print the top plate and bottom case separately, and secure them together using 5 mm M2 screws on the corners. The screws will need to be manually threaded into the bottom case.
The top plate is printed in one color only (red), with the outlines raised for easy brush painting. You'll need 3 colors (yellow, white, black) and red (optional). You can mix the paints for beige and red. First paint the yellow and beige areas, then go over the black outlines and white eye area for a clean finish. You may want to use masking tape to protect the sides of the outlines for a cleaner look.
The KoiPad utilizes standard keyboard switches with 2u PCB mounted stabilizers for the larger keys. After soldering your diodes and switches and snapping on the stabilizers, screw the pcb with 4mm standoffs of M2 size through the countersinks on the bottom of the case and the designated holes on the pcb. Screw these in before screwing on the top plate, and avoid rescrewing the top plate unless necessary to prevent stripping.
The rotary encoder is configured to control system volume up/down, and the keypad includes Enter and Num Lock mappings. You may need to adjust these key codes if your environment handles these special keys differently.
3D placeholder/reference models used in renders were sourced from other creators. Final hardware uses real components.
Keycap, switches, stabilizers, standoffs, encoder, and Seeeduino XIAO footprints and 3d models from ScottoKeebs
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | ~ | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D15, D16, D17 +1 |
| 7 | ~ | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_Plate | S9, S10, S11, S12, S13, S14, S17 |
| 7 | ~ | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | S1, S2, S3, S4, S5, S6, S7 |
| 5 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M1, M2, M2, M3, M4 |
| 3 | Stabilizer_MX_2.00u | ScottoKeebs_Stabilizer:Stabilizer_MX_2.00u | A1, A2, A3 |
| 2 | ~ | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_Vertical_Plate | S8, S15 |
| 1 | MCU_Seeed_XIAO_RP2040 | ScottoKeebs_MCU:Seeed_XIAO_RP2040 | U1 |
| 1 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW2 |
| 1 | Standoff_M2x4mm | ScottoKeebs_Scotto:Standoff_M2x4mm | M3 |
| 1 | ~ | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_Plate | S16 |
The 45 most common of 49 parts.

wa2ab1/KoiPad
17 Key Custom PCB numberpad with Unique Koi shaped Case and Volume Knob. Built for Hack Club Fallout!





benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display



It measures 80.2 × 174.6 mm and has 2 copper layers, 1.6 mm thick.
49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wa2ab1/KoiPad repository on GitHub, at the commit this page was made from: the board is pcb/Tech_Keyboard.kicad_pcb and its schematic pcb/Racing_Hub/Racing_Hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wa2ab1 before reusing the design.