4 layers90.8 × 47 mm
Pickit
ananevego/ProjectFreeCad
Конвертер библиотечных footprint-файлов KiCad .kicadmod в самостоятельные библиотеки FreePCB2 .fpl. Написан на Python 3.10+, внешние зависимости не нужны.
122 parts
4 layers90 × 47 mm
PICkit
VoxelTek/PICkit- Size
- 90 × 47 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 101
- Pads
- 381
- Tracks, vias
- 371, 49
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Jan 2024
- Updated
- 2 Jan 2024
Overview
PICkit is an open-source printed circuit board by VoxelTek, from the VoxelTek/PICkit repository on GitHub. It is a 4-layer board of 90 × 47 mm with 119 parts on 101 nets, routed with 371 tracks and 49 vias.
It is built around the 74AHC1G125GW, SN74LVC1T45DBV and 25LC256-I/P, with the MICROSMD005F, MMBT3904 and 2N2222A among its other parts. Its parts include 54 resistors, 30 capacitors, 10 ICs, 8 transistors and 7 diodes. It belongs with the PIC boards of this library.
Main components
12
74AHC1G125GW
SOT-353-40℃~+125℃ 1 1 2V~5.5V 4.8ns@5.5V,50pF 40uA 74AHC 8mA 8mA Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
SN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
25LC256-I/P
DIP-8-40℃~+85℃ 1,000,000 cycles 10MHz 2.5V~5.5V 200 Years 256Kbit 5ms Hardware write protection function、Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI DIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
MICROSMD005F
PolySwitch® Resettable PPTC Overcurrent Protection DeviceLittelfuseUncategorised
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
2N2222A
TO-92-55℃~+150℃ 1 NPN 100MHz 100nA 400 40V 5V 600mA 600mV 625mW NPN TO-92 Bipolar (BJT) ROHSSlkorBipolar (BJT)BAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky DiodesFDC6420C
SOT-23-6-55℃~+150℃ 1 N-Channel + 1 P-Channel 1.14W 2.8A 2.9nC@4.5V 20V 375pF 400mV 60pF 85mΩ@4.5V SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
MBR0520L
SOD-123-65℃~+125℃ 1 Independent 20V 250uA@20V 385mV@500mA 5.5A 500mA SOD-123 Schottky Diodes ROHSonsemiSchottky DiodesMMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)PMV48XPA2R
SOT-23-55℃~+175℃ 1 P-Channel 10nC@4.5V 20V 49mΩ@8V 4A 600mV 610mW、8.3W 679pF 75pF SOT-23 MOSFETs ROHSNexperiaMOSFETsZHCS1000
SOT-23Schottky DiodesTECH PUBLIC
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R21, R24, R28, R29, R37, R40, R43, R45, R46, R47, R50, R52, R54, R56 +1 |
| 14 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C12, C13, C14, C18, C19, C20, C21, C23, C24, C25, C26, C28 |
| 8 | 330 | Resistor_SMD:R_0603_1608Metric | R7, R10, R11, R19, R22, R31, R33, R34 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R4, R38, R44, R51 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C11, C16, C17 |
| 5 | 2.2k | Resistor_SMD:R_0603_1608Metric | R9, R23, R25, R42, R53 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R18, R30, R35, R48 |
| 3 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C22, C27, C29 |
| 3 | 200k | Resistor_SMD:R_0603_1608Metric | R8, R16, R17 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R20, R32, R36 |
| 3 | 5.0V | Diode_SMD:D_0603_1608Metric | D3, D4, D5 |
| 3 | MICROSMD005F | Resistor_SMD:R_0603_1608Metric | TH1, TH3, TH4 |
| 3 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6, Q7 |
| 3 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U4, U6, U8 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R55, R57 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C4, C7 |
| 2 | 2.7k | Resistor_SMD:R_0603_1608Metric | R39, R49 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric | R26, R27 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2, J3 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 12MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 25LC256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 2N2222A | Package_TO_SOT_THT:TO-92 | Q2 |
| 1 | 3.9k | Resistor_SMD:R_0603_1608Metric | R41 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C30 |
| 1 | 680uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | BAT54 | Package_TO_SOT_SMD:SOT-23-3 | D7 |
| 1 | FDC6420C | Package_TO_SOT_SMD:SuperSOT-6 | Q3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MBR0520L | Diode_SMD:D_SOD-123 | D2 |
| 1 | MCP1525-TT | Package_TO_SOT_SMD:SOT-23 | U7 |
| 1 | MCP1727-0802xMF | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U3 |
| 1 | MCP601-xOT | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | MMBT3906 | Package_TO_SOT_SMD:SOT-23-3 | Q8 |
| 1 | PIC24FJ256GB106-I_PT | Package_QFP:TQFP-64_10x10mm_P0.5mm | IC1 |
| 1 | PMV48XPA2R | Package_TO_SOT_SMD:SOT-23-3 | Q4 |
| 1 | SST25VF040B | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U2 |
| 1 | Thermistor_PTC | Resistor_SMD:R_0603_1608Metric | TH2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | ZHCS1000 | Package_TO_SOT_SMD:SOT-23 | D6 |
| 1 | ZXTP25020CFH | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
The 118 most common of 119 parts.
Questions
How big is the PICkit PCB?
It measures 90 × 47 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PICkit use?
119 parts, built around the 74AHC1G125GW, SN74LVC1T45DBV, 25LC256-I/P and MICROSMD005F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PICkit KiCad files?
From the VoxelTek/PICkit repository on GitHub, at the commit this page was made from: the board is PICkit.kicad_pcb and its schematic PICkit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PICkit design in my own project?
Its repository states no licence, so its author keeps all rights: ask VoxelTek before reusing the design.
Similar boards
- 2 layers140 × 70 mm
Dual
sirkha/PocketBeagleStepperCarrier
A board that utilizes a PocketBeagle to control stepper motors via Pololu like carriers.
193 parts - 4 layers52 × 94.2 mm
Tangara mainboard
dpaola2/Harmony
Current logistics, September 26: core modules are received, and the revision B shells, LCD supports and carrier gauge passed loose fit checks. Screws and foam are ordered. The SD trial playlist is prepared.
124 parts - 4 layers79.9 × 65.2 mm
Ethernet Dev Board
ResonanceGroup/ESP32_Ethernet_Dev_Board
Small dev board for the ESP32 that is meant to incorporate ethernet controller for testing
116 partsMIT - 4 layers51 × 22.9 mm
STM Feather
SailingTeamDarmstadt/Featherboard_STM32L452
Our custom designed PCB for the STM32L452 in the Feather format design
73 partsGPL-3.0 - 2 layers72.4 × 45.7 mm
- 2 layers130 × 105 mm
- 4 layers43.9 × 33.4 mm
