4 layers127 × 165 mm
ECU
lflaherty/ev-ecu
Custom ECU (firmware and hardware) for Bespoke Electric Vehicles
258 parts13Apache-2.0
2 layers63.2 × 38.5 mm
The pcb for the hades poolcontroller
- Size
- 63.2 × 38.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 17
- Pads
- 117
- Tracks, vias
- 173, 18
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 May 2020
- Updated
- 11 May 2020
Overview
Hades is an open-source printed circuit board by vmangelschots, from the vmangelschots/hades-poolcontroller-pcb repository on GitHub. It is a 2-layer board of 63.2 × 38.5 mm with 25 parts on 17 nets, routed with 173 tracks and 18 vias.
It is built around the ESP32-WROOM-32D, DS18B20 and LM1117MPX-33NOPB. Its parts include 7 resistors, 6 connectors, 3 capacitors, 3 ICs and 3 diodes. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
LM1117MPX-33NOPB
SOT-2230.003%Vout 0℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 64dB@(120Hz) 6mA 800mA Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdhades-poolcontroller-pcb
The pcb for the hades poolcontroller
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 1 | 0.1µf | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 100µf tantalum | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10µf tantalum | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 2N2222 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 56 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D3 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LED red | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LM1117MPX-3_3_NOPB | digikey-footprints:SOT-223 | U1 |
| 1 | Outside temperature | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J5 |
| 1 | R150 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Relay | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J6 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | incomming water temperature | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J4 |
| 1 | mode switch | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | outgooing water temperature | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J3 |
| 1 | reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the Hades PCB?
It measures 63.2 × 38.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hades use?
25 parts, built around the ESP32-WROOM-32D, DS18B20 and LM1117MPX-33NOPB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hades KiCad files?
From the vmangelschots/hades-poolcontroller-pcb repository on GitHub, at the commit this page was made from: the board is hades.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hades design in my own project?
Its repository states no licence, so its author keeps all rights: ask vmangelschots before reusing the design.
Similar boards
- 4 layers150 × 100 mm
- 2 layers240 × 174.3 mm
Final H00 panelicad pcb
Vedatori/Time-O-Mat
Addressable LED clock kit aimed for usage in STEM education. The ultimate solution to time telling...
312 parts7 - 2 layers60 × 100 mm
PaLampa MoBo H00
Vedatori/PaLampa
Mechanickou část lze rozdělit na dvě hlavní části - spodní krabici a horní lampu. Vnější části krabice jsou vyřezány z překližky na laserové řezačce a obsahují zámkové západky.
80 parts4 - 2 layers290 × 100 mm
ESP32-Wall Clock
SkullKill/ESP32-Wall-Clock-PCB
ESP32 based 30cm Wall Mounted Clock. WiFi, NTP, SNMP, web interface, MicroUsb, Type-C, HG3613 Retrofit
207 parts3GPL-3.0 - 2 layers80 × 50 mm
- 2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT - 2 layers100 × 57 mm
