Skip to the content
2 layersImu, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
72
Pads
325
Tracks, vias
881, 45
Pours
1
Routed
Yes
KiCad
KiCad 3
Created
4 Jul 2015
Updated
4 Jul 2015

Overview

Imu is an open-source printed circuit board by vladtcvs, from the vladtcvs/imu_pcb repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board with 53 parts on 72 nets, routed with 881 tracks and 45 vias.

It is built around the PCF8574T, TMP100NA and ADS1115, with the MPU-9250 among its other parts. Its parts include 12 resistors, 12 diodes, 10 capacitors, 9 connectors and 3 ICs. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

4

Parts

53
QtyValueFootprintReferences
12RSM0603R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
9CSM0603_CapaC2, C3, C4, C5, C6, C7, C8, C9, C10
4LEDLED-1206D9, D10, D11, D12
3CONN_5PIN_ARRAY_5x1P3, P5, P7
2ATTINY2313-SSO20LIC1, IC2
2CONN_4X2pin_array_4x2P6, P8
2CRYSTALC2X1, X2
1ADS1115MSOP10-0.5D3
1BATTERYbatteryBT1
1BR24LSO8ED5
1CONN_11X3pin_array_11x3D6
1CONN_2smaP1
1CONN_20X2conn_20x2P2
1CONN_3PIN_ARRAY_3X1K1
1CONN_4PIN_ARRAY_4x1P4
1CONN_4PIN_ARRAY_5x1P9
1CP1C2V8C1
1HC0903AHC0903AD7
1JUMPERPIN_ARRAY_2X1JP1
1ML8088Sml8088sED1
1MPU-9250qfn24D4
1MS5637qfn-4D2
1PCF8574SO16LU1
1PNPTO220_VERTQ1
1SW_PUSHbutton4SW1
1TMP100SOT23_6D8

Similar boards

  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 4 layers74 × 28 mmOpenFlowMeter, the printed circuit board in 3D

    OpenFlowMeter

    JochiSt/OpenFlowMeter

    Measuring Flow

    156 parts6GPL-3.0
  • 4 layers55.3 × 42.3 mmSkyfall(BackAgain), the printed circuit board in 3D

    Skyfall(BackAgain)

    Melih2123/Project_Skyfall

    Open-source. Modular. Built to grow. Powered by ESP32-S3 and lots of prayers ;_;

    72 parts2
  • 4 layers99.5 × 150.5 mmNewpcb, the printed circuit board in 3D

    Newpcb

    leorosenbaum11-ui/RFM-LoRa

    Part Models (more detailed BOM in files): Microcontroller: Adafruit Feather ESP32-S3 Pin Extender: MCU23S17 Transciever: Seeed WIO-LR2021 Keyboard Driver: STM32F042CFU(x) Keyboard: Solderparty Keebdeck Keyboard6R13C…

    48 parts1
  • 14 layers205.6 × 228.6 mmAcmi2-fpga, the printed circuit board in 3D

    Acmi2-fpga

    jamead/acmi2-hw-fpgabrd

    ACMI-2 KiCad files for the FPGA Board

    406 parts
  • 2 layers53.5 × 51.7 mmTankGauge, the printed circuit board in 3D

    TankGauge

    jaycedowell/RainCache

    33 parts
  • 4 layers60 × 45 mmHotplate, the printed circuit board in 3D

    Hotplate

    Keyaan-07/Hotplate

    Check out the Project's files on KiCanvas(PCB and Heating element) and Onshape!

    85 partsMIT

Questions

What parts does the Imu use?

53 parts, built around the PCF8574T, TMP100NA, ADS1115 and MPU-9250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Imu KiCad files?

From the vladtcvs/imu_pcb repository on GitHub, at the commit this page was made from: the board is imu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Imu design in my own project?

Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).