Skip to the content
123456

TMP100NA

Texas Instruments

-55°C to +125°C, ±3.0°C Accuracy, Digital Temperature Sensor with I2C Interface

Part id
ti/TMP100NA
Category
Uncategorised
Package
SOT23-6
Pins
6
Used on
40 open-source boards

Overview

The TMP100NA is an uncategorised made by Texas Instruments in a SOT23-6 package with 6 pins. -55°C to +125°C, ±3.0°C Accuracy, Digital Temperature Sensor with I2C Interface.

PCBKit's library has its KiCad symbol (Sensor_Temperature:TMP100, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 40 open-source boards in 17 repositories on GitHub use it.

Symbol

1SCL2GND3ADD14V+5ADD06SDA
Sensor_Temperature:TMP100From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

Pinout

6
The pins of the TMP100NA
PinNameType
1SCLInput
2GNDPower in
3ADD1Input
4V+Power in
5ADD0Input
6SDAInput/output

Open-source boards using it

40See all 40
  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 4 layers74 × 28 mmOpenFlowMeter, the printed circuit board in 3D

    OpenFlowMeter

    JochiSt/OpenFlowMeter

    Measuring Flow

    156 parts6GPL-3.0
  • 4 layers55.3 × 42.3 mmSkyfall(BackAgain), the printed circuit board in 3D

    Skyfall(BackAgain)

    Melih2123/Project_Skyfall

    Open-source. Modular. Built to grow. Powered by ESP32-S3 and lots of prayers ;_;

    72 parts2
  • 4 layers99.5 × 150.5 mmNewpcb, the printed circuit board in 3D

    Newpcb

    leorosenbaum11-ui/RFM-LoRa

    Part Models (more detailed BOM in files): Microcontroller: Adafruit Feather ESP32-S3 Pin Extender: MCU23S17 Transciever: Seeed WIO-LR2021 Keyboard Driver: STM32F042CFU(x) Keyboard: Solderparty Keebdeck Keyboard6R13C…

    48 parts1
  • 14 layers205.6 × 228.6 mmAcmi2-fpga, the printed circuit board in 3D

    Acmi2-fpga

    jamead/acmi2-hw-fpgabrd

    ACMI-2 KiCad files for the FPGA Board

    406 parts
  • 2 layers53.5 × 51.7 mmTankGauge, the printed circuit board in 3D

    TankGauge

    jaycedowell/RainCache

    33 parts
  • 4 layers60 × 45 mmHotplate, the printed circuit board in 3D

    Hotplate

    Keyaan-07/Hotplate

    Check out the Project's files on KiCanvas(PCB and Heating element) and Onshape!

    85 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TMP100NA?

Yes. The symbol is Sensor_Temperature:TMP100 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TMP100NA?

SOT23-6, with 6 pins. Its footprint is drawn on this page.

What can replace the TMP100NA?

Parts like it in the library: the SRV05-4 by DongChen, the TPS62A01PDDC by Texas Instruments, the TD2263 by TDSEMIC and the UCC287506DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TMP100NA?

40 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.