vivithequeen/Esp32-Devboard-Scanner-PCBhere at some super awesome screenshots!!
Esp32-Devboard Scanner PCB is an open-source printed circuit board by vivithequeen, from the vivithequeen/Esp32-Devboard-Scanner-PCB repository on GitHub. It is a 2-layer board of 40.9 × 46.4 mm with 16 parts on 23 nets, routed with 128 tracks and 8 vias.
It is built around the ESP32-C3-DEVKITM-1. Its parts include 2 resistors, 2 diodes, 1 transistor and 1 connector. It belongs with the microcontroller boards boards and the ESP32 and RISC-V boards of this library.
| Component | GPIO |
|---|---|
| Green LED | 2 |
| Red LED | 18 |
| Transitior | 3 |
| RST | 10 |
| IRQ | NONE |
| MISO | 6 |
| MOSI | 4 |
| SCK | 5 |
| SDA | 7 |
| Part name | What is it | How many | How many in the link | Price | Price with Tax | Price Per Component |
|---|---|---|---|---|---|---|
| Buzzer | 12x9.5 mm | 1 | 20 | $8.00 | $8.50 | $0.43 |
| Transistor | 2N2222 | 1 | 200 | $6.99 | $7.43 | $0.04 |
| 100ohm Resistor | we using 220 for safety | 2 | 100 | $5.49 | $5.83 | $0.06 |
| red led | 1 | 100 | $12.99 | $13.80 | $0.14 | |
| green led | 1 | 100 | $12.99 | $13.80 | $0.14 | |
| pcb | 1 | 1 | $5.00 | $5.31 | $5.31 | |
| devboard | esp-32-c3-devkitm-1 | 1 | 1 | $9.80 | $10.41 | $10.41 |
| pin headers | 4 | 50 | $7.89 | $8.38 | $0.17 | |
| MFRC522 | RFID SCANNER | 1 | 1 | $2.75 | $2.92 | $2.92 |
| JST Connector | 1 | 10 | $8.99 | $9.55 | $0.96 | |
| Case | 1 | 1 | $2.20 | $2.34 | $2.34 | |
| 0 | 1 | $- | $- | $- | ||
| 0 | 1 | $- | $- | $- | ||
| 0 | 1 | $- | $- | $- |
Total per pcb: $23.47
here at some super awesome screenshots!!
traces diagaram
front silkscreens
back silkscreens
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LED | LED_THT:LED_Rectangular_W3.0mm_H2.0mm | D1, D2 |
| 1 | 100 | Resistor_THT:R_Box_L13.0mm_W4.0mm_P9.00mm | R1 |
| 1 | BC107 | Package_TO_SOT_THT:TO-18-3 | Q1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | ESP32-C3-DEVKITM-1 | Footprints:XCVR_ESP32-C3-DEVKITM-1 | ESP32-C3-DevKitM-1 |
| 1 | LOGO | footprints:icon | G*** |
| 1 | LOGO | footprints:sherma | G*** |
| 1 | R | Resistor_THT:R_Box_L13.0mm_W4.0mm_P9.00mm | R2 |
The 10 most common of 16 parts.
It measures 40.9 × 46.4 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the ESP32-C3-DEVKITM-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vivithequeen/Esp32-Devboard-Scanner-PCB repository on GitHub, at the commit this page was made from: the board is Esp32-Devboard-Scanner-PCB.kicad_pcb and its schematic Esp32-Devboard-Scanner-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vivithequeen before reusing the design.
Ahmed-YSY/FleetGuard
IoT vehicle telematics for fleet & logistics — ESP32 + SIM7600G 4G/GPS tracker with fuel-theft detection, tamper/cargo security alarms, offline-resilient MQTT reporting, and OBD2 data over ESP-NOW.
iho77/ppo_v2
This work is licensed under a [Creative Commons Attribution-NonCommercial 4.0 International License][cc-by-nc].
TiboDevC/clockclock
Personal project of a kinetic clock inspired by Humans Since 1982, using 48 stepper motors to display time in an artistic and dynamic way.
Abineshpk007/KICAD-solar_panel_monitoring_prototype
This is my PCB, there are many outer like it but this is mine
diaxxu/CNC-Router
a challenge i gave myself to make something great ! yes its a cnc milling / laser / plotter machine
saniyafatima07/Hail_Mary
Lakshya: Low Cost Precision Guidance and Smart Electronic Fuze System
VladimirVladimirovMinkov/UOA_HPA
This is a code and document repository for the University of auckland Aeronaughtics Club Human Powered Aircraft
