Skip to the content
PCBKitNew board
2 layers62 × 80.7 mmBeagleboneProbotRevC7, the printed circuit board in 3D

BeagleboneProbotRevC7

VitorHugoAguiar/ProBot9

ProBot - Self Balancing Robot

Size
62 × 80.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
105
Pads
165
Tracks, vias
220, 23
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
13 Oct 2015
Updated
16 May 2019

Overview

BeagleboneProbotRevC7 is an open-source printed circuit board by VitorHugoAguiar, from the VitorHugoAguiar/ProBot repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 62 × 80.7 mm with 19 parts on 105 nets, routed with 220 tracks and 23 vias.

Its parts include 7 connectors, 6 resistors, 4 ICs and 1 diode. It belongs with the robots and motor control boards of this library.

README

Readme.md

ProBot - The Self Balancing Protest Robot

“…Our leading bankers and merchants speak to their congeners through the length and breadth of the land in a second of time; their rich and subtle souls can defy all material impediment, whereas the souls of the poor are clogged and hampered by matter, which sticks fast about them as treacle to the wings of a fly, or as one struggling in a quicksand: their dull ears must take days or weeks to hear what another would tell them from a distance, instead of hearing it in a second as is done by the more highly organised classes. Who shall deny that one who can tack on a special train to his identity, and go wheresoever he will whensoever he pleases, is more highly organised than he who, should he wish for the same power, might wish for the wings of a bird with an equal chance of getting them; and whose legs are his only means of locomotion? That old philosophic enemy, matter, the inherently and essentially evil, still hangs about the neck of the poor and strangles him: but to the rich, matter is immaterial; the elaborate organisation of his extra-corporeal system has freed his soul.” -Samuel Butler, Erewhon, Book of the Machines, 1872

Most robotics technologies are first implemented in military applications, most of the rest for business. Following on a history of related work, Probots are inexpensive, human-sized protest robots. No one has lost money by replacing human labor with machines, efficient devils, so the unemployment has been rising, and newly graduated Spanish students that are out of work stay too much time drinking calimocho and protesting. The indignados are unorganized and inneficient! So it is time to automate them, send robots for protests, unemploying them twice.

Any protester can control the robot while sitting in the caffee or at their gardens anywhere in the work by simply using a web page to control it, but also watch, hear and speak through it.

That’s why we created a self-balancing robot, with a rigid sturdy frame, a megaphone on the top as a symbol of protest and also as a way to talk to people.

This robot is 1,60m (5’/3’’) tall that self-balances in 2 wheels, controlled by a Sabertooth 2X25A or Cytron 13A 5-25V Motor Controller. The brain of the operation is a Beaglebone Black with an MPU6050 accelerometer and gyroscope and also optical encoders on each motor.

A shield was created to organize the components. The system is power-up by a 24V battery.

The megaphone is a DH-12, that has a siren and a microphone, that we hacked and placed a wire to connect to a sound jack output, enabling us to connect the megaphone to almost any device (ex: smartphone, MP3 player, laptop, you name it).

The system can be controlled remotely through wifi, using a smartphone hotspot connected to 3G or 4G network. A web page was created with the possibility of viewing the status of the probot, where if available can be controlled. Each ProBot can be controled with a touch device (a smartphone or a tablet), with a gamepad or even with the keyboard.

Any person can build a ProBot by just following the instructions available on instructubles. Thanks to Julio Fernandez Ostolaza, and la fabrica de las cosas bonitas for the inspiration.

Parts

19
QtyValueFootprintReferences
3150Resistors_ThroughHole:Resistor_Horizontal_RM10mmR4, R5, R6
2CONN_01X03Socket_Strips:Socket_Strip_Angled_1x03P2, P6
2Level_converterBeagleCapePro:Level_ConverterU2, U3
1100kResistors_ThroughHole:Resistor_Horizontal_RM10mmR1
16.8kResistors_ThroughHole:Resistor_Horizontal_RM10mmR2
1820Resistors_ThroughHole:Resistor_Horizontal_RM10mmR3
1Bat22.2Pin_Headers:Pin_Header_Straight_1x02P1
1BeagleboneBlackBeagleCapePro:BeaglecapePro_footU1
1CCapacitors_ThroughHole:C_Disc_D3_P2.50.1uF1
1CONN_01X02Socket_Strips:Socket_Strip_Straight_1x02P7
1Enc1Pin_Headers:Pin_Header_Straight_1x05P4
1Enc2Pin_Headers:Pin_Header_Straight_1x05P5
1LED_RABGBeagleCapePro:LED_RGB_common_cathode5mmD1
1MPU6050_THPin_Headers:Pin_Header_Straight_1x08U4
1STPin_Headers:Pin_Header_Straight_1x03P3

Questions

How big is the BeagleboneProbotRevC7 PCB?

It measures 62 × 80.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BeagleboneProbotRevC7 use?

19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BeagleboneProbotRevC7 KiCad files?

From the VitorHugoAguiar/ProBot repository on GitHub, at the commit this page was made from: the board is ProBot_Board/BeagleboneProbotRevC7.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BeagleboneProbotRevC7 design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

Similar boards

  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers50 × 60 mmDebate Device, the printed circuit board in 3D

    Debate Device

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    19 parts915
  • 2 layers102.9 × 96.7 mmISA adapter, the printed circuit board in 3D

    ISA adapter

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    19 parts805
  • 2 layers60 × 39 mmPs2usb, the printed circuit board in 3D

    Ps2usb

    rasteri/HIDman

    Adapting USB devices to work on old computers

    19 parts432
  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers80 × 80 mmGB BRK CPU G1, the printed circuit board in 3D

    GB BRK CPU G1

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    19 parts379CC-BY-4.0
  • 2 layers25.4 × 25.4 mmIna169, the printed circuit board in 3D

    Ina169

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    19 parts282
  • 2 layers58.4 × 28.6 mmNew rele, the printed circuit board in 3D

    New rele

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    19 parts269