2 layers
2 layers
Kicassv2
vito-pp/TPsE2- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 65
- Pads
- 168
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Oct 2024
- Updated
- 29 Nov 2024
Overview
Kicassv2 is an open-source printed circuit board by vito-pp, from the vito-pp/TPsE2 repository on GitHub. It is a 2-layer board with 28 parts on 65 nets.
It is built around the BC327, MM74HC164N and SN74LS153N, with the SN74LS139AN and SN74LS169BN among its other parts. Its parts include 12 resistors, 4 transistors, 3 connectors and 1 switch.
Main components
5
BC327
TO-921 PNP 100MHz 45V 5V 625mW 630 700mV 800mA PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
MM74HC164N
DIP-14-40℃~+85℃ 1 20ns@6V,50pF 2V~6V 50MHz 600mW 74HC 8 Asynchronous clear function Serial-to-Parallel DIP-14 Shift Registers ROHSonsemiShift Registers
SN74LS153N
PDIP-160℃~+70℃ 17ns@5V,15pF 4.75V~5.25V 400uA 74LS 8/2 8mA Multiplexer Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersSN74LS139AN
PDIP-160℃~+70℃ 38ns@5V,15pF 4.75V~5.25V 4/8 400uA 74LS 8mA Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersSN74LS169BN
PDIP-160℃~+70℃ 1 25MHz 4.75V~5.25V Divide-by-2 Rising Edge Synchronous Up Counter、Down Counter PDIP-16 Counters, Dividers ROHSTexas InstrumentsCounters, Dividers
README
README.mdTPsE2
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R | TCLib:R_0.25W | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | BC327 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4 |
| 2 | MM74HC164N | tp2_e2_footprints:74HC164 | U_SR1, U_SR2 |
| 2 | SN74LS153N | tp2_e2_footprints:74LS153 | U_MUX1, U_MUX2 |
| 1 | 74LS47N | tp2_e2_footprints:74LS47N | U_BCD1 |
| 1 | CA56-12SURKWA | Display_7Segment:CA56-12SURKWA | U_DISP1 |
| 1 | CON_DATA | TCLib:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | CON_GND | TCLib:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CON_Vcc | TCLib:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SN74LS139AN | tp2_e2_footprints:74LS139 | U_DECO1 |
| 1 | SN74LS169BN | tp2_e2_footprints:74LS169 | U_CONT1 |
| 1 | SW_Tactile | TCLib:SW_Tactile | S1 |
Questions
What parts does the Kicassv2 use?
28 parts, built around the BC327, MM74HC164N, SN74LS153N and SN74LS139AN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicassv2 KiCad files?
From the vito-pp/TPsE2 repository on GitHub, at the commit this page was made from: the board is tp2/kicassv2/kicassv2.kicad_pcb and its schematic tp2/kicassv2/kicassv2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicassv2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vito-pp before reusing the design.
Similar boards
- 2 layers82.4 × 43.1 mm
27C160 Adapter
mafe72/27c160-tl866-adapter
Adapter to program EPROMs with more than 40 Pins on the TL866 universal programmer.
12 parts149GPL-3.0 - 2 layers101.6 × 96.5 mm
27C160 Adapter panel
gaggi/27c160-tl866-adapter
Adapter to program EPROMs with more than 40 Pins on the popular TL866 universal programmer
20 parts46GPL-3.0 - 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers83.8 × 72.4 mm
- 2 layers224.2 × 153.7 mm
- 2 layers299.2 × 180 mm
- 2 layers213.6 × 127.5 mm
