

Thermocouple breakout
The K-Type thermocouple conditioner is an easy way to use a K-Type thermocouple with an Arduino or other microcontrollers. At its heart is a AD595 thermocouple conditioner IC.
- Size
- 36.8 × 56.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 15
- Pads
- 52
- Tracks, vias
- 88, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Mar 2014
- Updated
- 26 May 2016
Overview
Thermocouple breakout is an open-source printed circuit board by visgence, from the visgence/thermocouple-breakout repository on GitHub. It is a 2-layer board of 36.8 × 56.8 mm with 15 parts on 15 nets, routed with 88 tracks and 1 via.
It is built around the 74HCT04D. Its parts include 3 resistors, 2 ICs, 2 diodes, 2 connectors and 1 capacitor. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdThe K-Type thermocouple conditioner is an easy way to use a K-Type thermocouple with an Arduino or other microcontrollers. At its heart is a AD595 thermocouple conditioner IC. The AD595 is laser trimmed for accuracy and performs automatic cold-junction compensation, which means you can just drop it into a project and get accurate results right away.
We created the K-Type Thermocouple Conditioner board while rebuilding our reflow toaster oven. The original controller used an AD595 and we were happy with its results. Since the toaster oven is a semi-permanent setup, we gave the board screw terminals and holes for robust mounting.
Specs
- AD595A laser trimmed for K-type thermocouple and 3 degree C basic accuracy
- 10mV / K output, easy to read with any ADC
- K-type input fits standard probes
- Alarm output and LED signals that probe is disconnected
- Screw terminals and mounting holes for easy long-term mounting
Use with an Arduino
We built our thermocouple conditioner specifically to use with Arduino and compatible boards. See the example sketch for a simple example.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | pin | visgence_parts:1pin_C | h1, h2, h3, h4 |
| 2 | 1k | visgence_parts:SM0603_VIS | R2, R3 |
| 1 | 74HCT04 | SMD_Packages:SO14N | U2 |
| 1 | AD594/95 | Sockets_DIP:DIP-14__300_ELL | U1 |
| 1 | ALARM | LEDs:LED-0603 | D1 |
| 1 | C | visgence_parts:SM0603_Capa_VIS | C1 |
| 1 | CONN_2 | visgence_parts:PCC-SMP | P2 |
| 1 | CONN_4 | Connect:bornier4 | P1 |
| 1 | LOGO | visgence_parts:LOGO | G*** |
| 1 | PWR | LEDs:LED-0603 | D2 |
| 1 | R | visgence_parts:SM0603_VIS | R1 |
Similar boards
- 2 layers333.4 × 149.9 mm

- 2 layers297.2 × 180.3 mm

- 2 layers99.1 × 99.7 mm

RC6502 General Video Adapter
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
80 parts193GPL-3.0 - 2 layers99.1 × 49.9 mm

- 2 layers

LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers249.9 × 89.4 mm

CSCvon8
DoctorWkt/CSCvon8
A crazy small 8-bit CPU built with only seventeen 7400-series chips.
55 parts112GPL-3.0 - 2 layers90 × 60 mm

Gotek Floppy Disk Emulator V2
RichardRozehnal/Gotek-Floppy-Disk-Emulator-V2
Floppy disk emulator for old computers and machines, Amiga, Atari ST, etc.
66 parts66GPL-3.0 - 2 layers72.8 × 75.6 mm

TMS9918
michalin/TMS9918_Arduino
8-bit retro graphic card with TMS9918 and Arduino library
22 parts53GPL-3.0
Questions
How big is the Thermocouple breakout PCB?
It measures 36.8 × 56.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Thermocouple breakout use?
15 parts, built around the 74HCT04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thermocouple breakout KiCad files?
From the visgence/thermocouple-breakout repository on GitHub, at the commit this page was made from: the board is hardware/thermocouple-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thermocouple breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask visgence before reusing the design.