2 layers85 × 40 mm
Dcdc breakout
Poppy-Robotics/dcdc-breakout
Carrier board for 1/16 and 1/32 brick DC/DC converters with XT30 input, trim, and minifit output.
24 parts
2 layers
MainBoardV3
VincidaB/ezBotV2-electronics- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 171
- Pads
- 177
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 May 2024
- Updated
- 28 Jan 2025
Overview
MainBoardV3 is an open-source printed circuit board by VincidaB, from the VincidaB/ezBotV2-electronics repository on GitHub. It is a 2-layer board with 15 parts on 171 nets.
It is built around the I3A4W008A033V-001-R and TEN 30-2423. Its parts include 9 connectors and 1 IC. It belongs with the RP2040 boards of this library.
Main components
2README
README.md
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x05_Pin | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2, J4, J5, J6 |
| 2 | TMCSilentStepStick | Ensmasteel_librairy:TMCStick | A1, A2 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J7 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J8 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J3 |
| 1 | I3A4W008A033V-001-R | Ensmasteel_librairy:CONV_I3A4W008A033V-001-R | PS2 |
| 1 | Pico | Ensmasteel_librairy:RPi_Pico_SMD_TH | U1 |
| 1 | Raspberry_Pi_4 | Ensmasteel_librairy:Raspberry_Pi_4 | J1 |
| 1 | SEN-15335 | Ensmasteel_librairy:SEN-15335 | IMU1 |
| 1 | TEN_30-2423 | Ensmasteel_librairy:CONV_TEN_30-2423 | PS1 |
Similar boards
- 6 layers82 × 75 mm
- 2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT
Questions
What parts does the MainBoardV3 use?
15 parts, built around the I3A4W008A033V-001-R and TEN 30-2423. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MainBoardV3 KiCad files?
From the VincidaB/ezBotV2-electronics repository on GitHub, at the commit this page was made from: the board is mainBoardV3/mainBoardV3.kicad_pcb and its schematic mainBoardV3/mainBoardV3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MainBoardV3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask VincidaB before reusing the design.