
Russell
meshmy/russell
Russell is a board designed to mount on an ER34615/IFR32700 cell and go Up! on a balloon

A device with < 10ms response time to epilepsy seizure and automated aministration of antidote via microneedles. Juts a model though :)
Anti epilepsy is an open-source printed circuit board by VicTheM, from the VicTheM/anti-epilepsy repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 84.5 × 111 mm with 27 parts on 93 nets.
It is built around the ESP32-S2-WROVER-I(4M), MAX30102 and TMP100NA, with the A4954, CN3158 and MPU-6050 among its other parts. Its parts include 9 resistors, 6 ICs, 5 transistors, 3 diodes and 1 switch. It belongs with the ESP32 boards of this library.



| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R3, R4, R5, R7, R8 |
| 4 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2, R6, R9 |
| 4 | 2N2219 | Package_TO_SOT_THT:TO-92L_HandSolder | Q1, Q2, Q3, Q5 |
| 3 | LED | LED_THT:LED_D10.0mm | D1, D2, D3 |
| 1 | A4954 | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm | U1 |
| 1 | Battery | Battery:BatteryHolder_Bulgin_BX0123_1xCR123 | 3.7V1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CN3158 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U7 |
| 1 | ESP32-S2-WROVER | RF_Module:ESP32-C3-DevKitM-1 | U6 |
| 1 | MAX30102 | OptoDevice:Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U5 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | Motor_DC | Motors:Vybronics_VZ30C1T8219732L | M1 |
| 1 | Q_NPN_Darlington_BCEC | Package_TO_SOT_THT:TO-92L_HandSolder | Q4 |
| 1 | SW_SPST | Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH4xxxxxxV2 | SW1 |
| 1 | TMP100 | Package_TO_SOT_SMD:SOT-23-6 | U2 |

meshmy/russell
Russell is a board designed to mount on an ER34615/IFR32700 cell and go Up! on a balloon

NITHYAR2005/PCB-BOARD-DESIGN-FOR-IOT-ENABLED-WEARABLE-HEALTH-MONITOR

IDMIL/Mechaduino-Hardware-KiCad
An updated KiCad port of Tropical Labs' open-source industrial servo.



HexaBitsEdu/ESP32-MiniDrone
this project is a drone based on esp32 microcontroller and coreless DC motor

abhinav937/RP2040_SOS_band
PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.

It measures 84.5 × 111 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the ESP32-S2-WROVER-I(4M), MAX30102, TMP100NA and A4954. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VicTheM/anti-epilepsy repository on GitHub, at the commit this page was made from: the board is hardware/hardware.kicad_pcb and its schematic hardware/hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).