
FJElectricsPCBBack
vicente-da-silva/PowerDepot
Using Power Depot Distribution PCBs in a FJ Cruiser Overlanding Build

Using Power Depot Distribution PCBs in a FJ Cruiser Overlanding Build
FJElectricsPCBFront is an open-source printed circuit board by vicente-da-silva, from the vicente-da-silva/PowerDepot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 234 × 131 mm with 116 parts on 47 nets, routed with 468 tracks and 0 vias.
It is built around the CB1-R-12V. Its parts include 33 connectors, 15 resistors, 10 switches, 5 diodes and 5 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | MountingHole | FJElectricsPCBCommon:NPTH_3mm_ID | H1, H2, H10, H11, H12, H13, H14, H15, H17, H18, H19, H21, H22, H23, H24, H26 +12 |
| 10 | 30A | FJElectricsPCBCommon:FuseHolder20x5Fuse | Fuse_1, Fuse_2, Fuse_3, Fuse_4, Fuse_5, Fuse_6, Fuse_7, Fuse_8, Fuse_9, Fuse_10 |
| 10 | 600 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 10 | LED | LED_THT:LED_D5.0mm | Fuse1, Fuse2, Fuse3, Fuse4, Fuse5, Fuse6, Fuse7, Fuse8, Fuse9, Fuse10 |
| 10 | MEDIUM TB x2 | FJElectricsPCBCommon:TerminalBlock_7.62_2x1 | J3, J4, J6, J9, J14, J17, J20, J24, J26, J27 |
| 10 | PP 2 WAY | FJElectricsPCBCommon:PowerPole_15_45 | J15, J16, J19, J22, J25, J29, J30, J31, J35, J36 |
| 5 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R12, R13, R14, R15 |
| 5 | CB1-R-12V | FJElectricsPCBCommon:Relay_PCB_Socket_V23333 | K1, K2, K3, K4, K5 |
| 5 | D | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5 |
| 5 | Header | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2, J5, J7, J8, J10 |
| 5 | Jumper_Bolt | FJElectricsPCBCommon:ScrewM4Jumper | J32, J33, J34, J37, J38 |
| 5 | Q_NPN_Darlington_BCE | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5 |
| 5 | SW_SPST | FJElectricsPCBCommon:SwitchMount | SW1, SW2, SW3, SW4, SW5 |
| 2 | Conn_01x01 | FJElectricsPCBCommon:TerminalM20_x1 | J18, J39 |
| 1 | SB120 | FJElectricsPCBCommon:SA120 | J1 |

vicente-da-silva/PowerDepot
Using Power Depot Distribution PCBs in a FJ Cruiser Overlanding Build

josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards

TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family

joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!


LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

drfailov/DRM_Watch_v3
DRM Watch 3 - Наручний годинник з дисплеєм SHARP Memory LCD


It measures 234 × 131 mm and has 2 copper layers, 1.6 mm thick.
116 parts, built around the CB1-R-12V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vicente-da-silva/PowerDepot repository on GitHub, at the commit this page was made from: the board is FJElectricsPCB Front Panel/FJElectricsPCBFront.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).