Skip to the content
2 layers107 × 58 mmTfi board, the printed circuit board in 3D

Schematics and PCB for tfi computer

Size
107 × 58 mm
Copper layers
2
Thickness
1.6 mm
Parts
98
Nets
75
Pads
260
Tracks, vias
493, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
2 Mar 2018
Updated
15 Jun 2022

Overview

Tfi board is an open-source printed circuit board by via, from the via/tfi-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 107 × 58 mm with 98 parts on 75 nets, routed with 493 tracks and 0 vias.

It is built around the MCP2562-H/P, TC4427EOA and LM2940S-5.0, with the VND7NV04-E among its other parts. Its parts include 46 resistors, 27 diodes, 9 capacitors, 6 transistors and 5 ICs.

Main components

4

README

README.md

Testing hardware for TFI-computer

Analog

Schematic and PCB for external TLC2543-based ADC board

  • Separate 5V supply to ADC and external sensors
  • Dedicated protected inputs for:
    • Battery Reference Voltage
    • Intake Temperature
    • Coolant Temperature
    • Throttle Position
    • Exhaust Gas Oxygen
    • Spare Thermistor
  • Addititional 5 unprotected inputs
  • SPI interface, and end-of-conversion output

IO

Schematic and PCB for various digital IO and drivers

  • 4x 0.5 Amp, 12 Volt ignition outputs
  • 2x 2 Amp, 12 Volt high-side driver outputs
  • 4x 2 Amp injector drivers
  • 2x 2 amp low-side drivers
  • CAN driver (Remove 3.3 V Zener to use 5V logic lines)
  • 2 protected digital inputs

Parts

98
QtyValueFootprintReferences
12100kResistors_ThroughHole:Resistor_Horizontal_RM7mmR8, R9, R10, R11, R12, R13, R34, R35, R36, R37, R40, R41
122.43kResistors_ThroughHole:Resistor_Horizontal_RM7mmR22, R23, R25, R26, R27, R28, R30, R31, R32, R33, R38, R39
12DDiodes_ThroughHole:Diode_DO-41_SOD81_Vertical_KathodeUpD2, D3, D11, D12, D20, D21, D22, D23, D24, D25, D26, D27
12LEDLEDs:LED-3MMD5, D6, D7, D8, D9, D10, D13, D14, D15, D16, D17, D18
111kResistors_ThroughHole:Resistor_Horizontal_RM7mmR1, R2, R3, R4, R5, R6, R7, R14, R21, R29, R48
6330Resistors_ThroughHole:Resistor_Horizontal_RM7mmR42, R43, R44, R45, R46, R47
6VND7NV04TO_SOT_Packages_SMD:TO-252-2LeadQ1, Q2, Q3, Q4, Q5, Q6
40.1 uFCapacitors_ThroughHole:C_Disc_D3_P2.5C1, C2, C7, C8
4150Resistors_ThroughHole:Resistor_Horizontal_RM7mmR17, R18, R19, R20
31 uFCapacitors_ThroughHole:C_Disc_D3_P2.5C3, C4, C5
3CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P1, P2, P3
3TC4427Housings_DIP:DIP-8_W7.62mmU1, U2, U3
2D_ZenerDiodes_ThroughHole:Diode_DO-41_SOD81_Vertical_KathodeUpD4, D19
110 uFCapacitors_ThroughHole:C_Disc_D3_P2.5C6
1120Resistors_ThroughHole:Resistor_Horizontal_RM7mmR24
13.3 V ZenerDiodes_ThroughHole:Diode_DO-41_SOD81_Vertical_KathodeUpD1
147 uFCapacitors_ThroughHole:C_Disc_D3_P2.5C9
1CONN_02X06Pin_Headers:Pin_Header_Straight_2x06P4
1CONN_02X09Pin_Headers:Pin_Header_Straight_2x09P5
1LM2940TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal_LargePadsU5
1MCP2562-H/PHousings_DIP:DIP-8_W7.62mmU4

More from via/tfi-board

2
  • 2 layers136 × 64 mmViaems, the printed circuit board in 3D

    Viaems

    via/tfi-board

    Schematics and PCB for tfi computer

    210 parts1MIT
  • 2 layers80 × 40 mmAnalog, the printed circuit board in 3D

    Analog

    via/tfi-board

    Schematics and PCB for tfi computer

    65 parts1MIT

Similar boards

  • 2 layers29.9 × 66.7 mm12V-4A buck converter, the printed circuit board in 3D

    12V-4A buck converter

    MohamedHassanExp/12V-4A-buck-converter

    DC-DC buck converter that utilizes Texas instruments UC3842 IC to drive a 12V load with up to 4A of current from a source voltage up to 30V.

    31 parts1MIT
  • 2 layers100 × 50 mmBus bridge encoders sonar, the printed circuit board in 3D

    Bus bridge encoders sonar

    makerbus/bus_bridge_encoders_sonar

    A PCB that connects a dual H-bridge, dual quadrature shaft encoders and some sonars to a bus.

    63 parts
  • 2 layers100 × 50 mmBus sonar10, the printed circuit board in 3D

    Bus sonar10

    makerbus/bus_sonar10

    Connect 10 sonar modules to a bus.

    40 parts
  • 2 layers114.3 × 63.5 mmBSPD ManchesterStingerMotorsports, the printed circuit board in 3D

    BSPD ManchesterStingerMotorsports

    ManchesterStingerMotorsports/BSPD

    The diagram below shows how the bspd would work (NOT the actual schematic)

    55 parts2
  • 2 layers132.8 × 93 mmCharge, the printed circuit board in 3D

    Charge

    yu65536/Power-Eater

    Ni-MH battery charger for mini4wd ミニ四駆用ニッケル水素充電器

    140 parts2
  • 2 layers99.8 × 94 mmV0.4Mini, the printed circuit board in 3D

    V0.4Mini

    jeagan626/modEFI

    Hardware and Code for the Speeduino Based modEFI platform

    66 parts1
  • 2 layers65 × 30 mmStratoZero, the printed circuit board in 3D

    StratoZero

    ladecadence/StratoZero

    StratoZero Raspberry Pi Zero Hat for High Altitude Balloon missions

    42 parts
  • 4 layers57.5 × 68.7 mmCoffee spring21, the printed circuit board in 3D

    Coffee spring21

    UWCubeSat/coffee-can-radar

    55 parts

Questions

How big is the Tfi board PCB?

It measures 107 × 58 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tfi board use?

98 parts, built around the MCP2562-H/P, TC4427EOA, LM2940S-5.0 and VND7NV04-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tfi board KiCad files?

From the via/tfi-board repository on GitHub, at the commit this page was made from: the board is io.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tfi board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).