2 layers90 × 76.5 mm
2 layers53.3 × 43.2 mm
Soil moister air
VerticalFarmIB3/VerticalFarmIB3.github.ioVertical farm - IB3 documentation and webpages
- Size
- 53.3 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 39
- Pads
- 114
- Tracks, vias
- 121, 33
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 May 2024
- Updated
- 24 May 2024
Overview
Soil moister air is an open-source printed circuit board by VerticalFarmIB3, from the VerticalFarmIB3/VerticalFarmIB3.github.io repository on GitHub. It is a 2-layer board of 53.3 × 43.2 mm with 25 parts on 39 nets, routed with 121 tracks and 33 vias.
It is built around the ESP32-WROOM-32 and AMS1117-3.3. Its parts include 6 resistors, 6 connectors, 3 capacitors, 2 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
2
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdVertical farm - IB3 documentation and webpages
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J6 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10µ | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 22µ | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | BOOT | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
The 21 most common of 25 parts.
Questions
How big is the Soil moister air PCB?
It measures 53.3 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Soil moister air use?
25 parts, built around the ESP32-WROOM-32 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Soil moister air KiCad files?
From the VerticalFarmIB3/VerticalFarmIB3.github.io repository on GitHub, at the commit this page was made from: the board is inhoud/plantensensor/PCB Plantsensing/soil_moister_air/soil_moister_air.kicad_pcb and its schematic inhoud/energiemonitoring/Testcodes/voltagesensor/voltage_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Soil moister air design in my own project?
Its repository states no licence, so its author keeps all rights: ask VerticalFarmIB3 before reusing the design.
Similar boards
- 2 layers85 × 56 mm
- 2 layers62.2 × 30.5 mm
WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44 - 2 layers150 × 50 mm
- 2 layers40 × 68 mm
MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 2 layers259.5 × 60.7 mm
1512hh control
larryqiann/AP1512HH-ESP32
Coway AP1512HH Main Board replacement with ESP32
71 parts29CERN-OHL-P-2.0 - 2 layers64.6 × 87.1 mm
- 2 layers139.7 × 88.9 mm
