

Pot adapter board
Plans and part files for DIY and replica Sound Voltex controllers.
- Size
- 28 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 3
- Pads
- 12
- Tracks, vias
- 5, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 Apr 2021
- Updated
- 4 May 2023
Overview
Pot adapter board is an open-source printed circuit board by veroxzik, from the veroxzik/sdvx-repo repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 28 × 20 mm with 4 parts on 3 nets, routed with 5 tracks and 0 vias.
It is built around the S3B-ZR. It belongs with the audio and music and interfaces and adapters boards of this library.
Main components
1README
PCBs/pot-adapter-board/README.mdPot Adapter Board
This board is designed to adapt generic hall effect potentiometers to use the same JST connector as Sensatec pots, such as the one used in the Sound Voltex volume knob assembly.
Download
Download the gerbers from this folder, it is the only *.zip file.
Potentiometer
The potentiometer can be found by using various keywords such as "Non-contact Angle Sensor", "360 Degrees", "Digital Potentiometer".
The manufacturer is listed on the pot as PandAuto and the part number is P3020-V1-CW360.
One such link: https://www.aliexpress.com/item/4000112340019.html

As of writing (2022-05) the price is about $20USD/ea.
PCB
The PCB is designed to be a single layer. Standard board thickness (1.6mm) and all default options should suffice.
JST Connector
The other component on the board is JST P/N S3B-ZR. This matches the connector on the Sensatec encoder, providing drop-in capabilities.
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 2.2mm | MountingHole:MountingHole_2.2mm_M2_Pad_TopBottom | H1, H2, H3 |
| 1 | S3B-ZR | local-footprints:JST_ZH_S3B-ZR_1x03_P1.50mm_Horizontal | J1 |
Similar boards
- 2 layers79 × 79 mm

- 2 layers79 × 79 mm

- 2 layers18.5 × 26 mm

24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0 - 2 layers116 × 33 mm

- 2 layers19 × 18 mm

Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm

Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm

Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm

XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0
Questions
How big is the Pot adapter board PCB?
It measures 28 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pot adapter board use?
4 parts, built around the S3B-ZR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pot adapter board KiCad files?
From the veroxzik/sdvx-repo repository on GitHub, at the commit this page was made from: the board is PCBs/pot-adapter-board/pot-adapter-board.kicad_pcb and its schematic PCBs/pot-adapter-board/pot-adapter-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pot adapter board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).