

V0.4.4b
Fork for my own additions
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 294
- Nets
- 182
- Pads
- 668
- Tracks, vias
- 990, 89
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Feb 2021
- Updated
- 4 Feb 2021
Overview
V0.4.4b is an open-source printed circuit board by venderbroeck, from the venderbroeck/speeduino repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 100 × 100 mm with 294 parts on 182 nets, routed with 990 tracks and 89 vias.
It is built around the TC4424AVOA, MPX4250A and VNLD5090TR-E, with the SSM3K357R, 1SMB5919BT3G and AYZ0202AGRLC among its other parts. Its parts include 59 resistors, 27 capacitors, 20 diodes, 10 ICs and 8 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7TC4424AVOA
SOIC-8-40℃~+150℃ 12ns 12ns 150uA 2 4.5A 4.5A 4.5V~18V MOSFET SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate DriversMPX4250A
SIP-6Pressure SensorsNXP SemiconductorsVNLD5090TR-E
SO-8-40℃~+150℃ 13A 2 4.5V~5.5V 90mΩ Active High Low Side Switch Overvoltage protection、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SO-8 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution SwitchesSSM3K357R
SOT23FSOT23F New Arrivals ROHSToshibaUncategorised1SMB5919BT3G
SMB(DO-214AA)Zener DiodesFUXINSEMIAYZ0202AGRLC
SMD-10℃~+60℃ 12V DPDT PC Pin Rectangular Columnar Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide SwitchesB130-13-F(MS)
SMASchottky DiodesMSKSEMI
README
README.mdSpeeduino
The Speeduino project is a flexible, fully featured Engine Management Systems (EMS aka ECU) based on the low cost and open source Arduino platform. It provides the hardware, firmware and software components that make up an engine management system, all provided under open licenses. With over 1000 installations, Speeduino has matured into a product that meets the needs of the hobbyist and enthusiast community without driving prices to the levels of traditional aftermarket ECUs.
Documentation
The Speeduino online manual can be found at: https://wiki.speeduino.com
Where to Buy
Pre-made Speeduino units/boards are available from a number of official resellers
These resellers all contribute a portion of sales back to the project to allow for continued development to take place and we encourage sales through them whenever possible.
Of course, being open source, you are free to use the design files provided here to create your own hardware!
Support
In addition the manual referenced above, Speeduino has a large and very vibrant community of people to help out with your setup or any questions you might add.
Contributors
This project exists thanks to all the people who contribute, both in terms of code and testing provided. If you'd like to get involved, please have a read through Contributing and then jump on Slack to discuss things further
Parts
294| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R17, R18, R21, R22, R29, R37, R41, R42, R47, R48, R53, R56, R57 +1 |
| 12 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C9, C10, C11, C16, C18, C20, C22, C23, C24, C26 |
| 12 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R15, R16, R19, R20, R49, R50, R60, R61 |
| 9 | 2.4k | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12, R23, R24, R25, R26, R33 |
| 8 | 470R | Resistor_SMD:R_0805_2012Metric | R31, R32, R34, R38, R39, R40, R62, R63 |
| 8 | D | Diode_SMD:D_SOD-323 | D5, D6, D11, D12, D16, D17, D18, D19 |
| 8 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D7, D8, D9, D10 |
| 5 | 0.22uF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C12, C13, C14 |
| 5 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP6, JP7, JP8, JP9, JP10 |
| 4 | 10R | Resistor_SMD:R_0805_2012Metric | R13, R14, R27, R28 |
| 4 | VNLD5090 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3, U7, U9 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C25, C27 |
| 3 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J6, J7 |
| 3 | SSM3K357R | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C1, C15 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R45, R51 |
| 2 | 2.49k | Resistor_SMD:R_0805_2012Metric | R35, R36 |
| 2 | 220R | Resistor_SMD:R_0805_2012Metric | R43, R44 |
| 2 | D_Zener | Diode_SMD:D_SOD-323 | D13, D20 |
| 2 | PULL-UP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP4, JP5 |
| 2 | Polyfuse | Fuse:Fuse_1812_4532Metric | F1, F2 |
| 2 | TC4424A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 2 | VR-HALL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2, JP3 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C17 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R46 |
| 1 | 1SMB5919BT3G | Diode_SMD:D_SMB | D15 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C19 |
| 1 | 270nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R52 |
| 1 | 3.9k | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 470pf | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C21 |
| 1 | AYZ0202AGRLC | Misc:AYZ0202AGRLC | S1 |
| 1 | Arduino_Mega2560_Shield | Shields:Arduino_Mega2560_Shield_IO_Only | XA1 |
| 1 | B130-13-F | Diode_SMD:D_SMA | D14 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x20_Counter_Clockwise | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J4 |
| 1 | Ignition Voltage | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LM2940S-5.0/NOPB | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U8 |
| 1 | LOGO | Misc:WTM logo_sml | G*** |
| 1 | MPX4250 | Misc:MPX4250 | U5 |
| 1 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | SP720 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | Trig Cond Socket | Package_DIP:DIP-8_W7.62mm_Socket | IC3 |
| 1 | Varistor | Varistor:RV_Disc_D15.5mm_W4.7mm_P7.5mm | RV1 |
The 144 most common of 294 parts.
Similar boards
- 2 layers100 × 100 mm

- 4 layers80.3 × 86.4 mm

- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 4 layers154 × 159 mm

- 4 layers160 × 117.5 mm

- 2 layers100.3 × 99.3 mm

Miatuino
Maverick765/miatuino
まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。
121 parts1GPL-2.0 - 2 layers40.6 × 20.3 mm

Questions
How big is the V0.4.4b PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the V0.4.4b use?
294 parts, built around the TC4424AVOA, MPX4250A, VNLD5090TR-E and SSM3K357R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the V0.4.4b KiCad files?
From the venderbroeck/speeduino repository on GitHub, at the commit this page was made from: the board is reference/hardware/v0.4/0.4.4b/v0.4.4b.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the V0.4.4b design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).