2 layers38 × 56 mm
AC M V2
ERICfkzy/DC-AC-Converter-AC_M-
This is a PCB project for the power supply circuit for the simple transformer model. It converts DC to AC voltage applied on the primary of the transformer model
20 parts
4 layers104.1 × 61 mm
Scout Board
vectech-dev/Scout_Board_pcb- Size
- 104.1 × 61 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 132
- Pads
- 235
- Tracks, vias
- 229, 10
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 May 2024
- Updated
- 19 Dec 2024
Overview
Scout Board is an open-source printed circuit board by vectech-dev, from the vectech-dev/Scout_Board_pcb repository on GitHub. It is a 4-layer board of 104.1 × 61 mm with 31 parts on 132 nets, routed with 229 tracks and 10 vias.
It is built around the BSS138, IRFZ44NSTRLPBF and 100UF/16V, with the B2B-XH-A(LF)(SN) and B4B-XH-A(LF)(SN) among its other parts. Its parts include 13 resistors, 7 connectors, 3 transistors, 2 ICs and 1 capacitor. It belongs with the ESP32 boards of this library.
Main components
5
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
IRFZ44NSTRLPBF
D2PAK-55℃~+175℃ 1 N-channel 1.47nF 17.5mΩ@10V 3.8W 49A 4V 55V 63nC@10V 88pF D2PAK MOSFETs ROHSInfineon TechnologiesMOSFETs
100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorised
B2B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
B4B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 12.4mm 1x4P 2.5mm 250V 3A 4 4P 5.75mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdPinout for Scout Board
Motor Control
- In1 - GPIO_21/J3_18
- In2 - GPIO_35/J3_13
Motor Switches
- Sw1 - GPIO_15/J1_8
- Sw2 - GPIO_6/J1_6
Buttons
- Flip Button - GPIO_7/J1_7
- Capture Button - GPIO_18/J1_11
SBC
- Power - GPIO_8/J1_12
Lights
- TopLights - Gpio_13/J1_19
- BottomLights - Gpio_14/J1_20
Communication
- RxD(ESP) - Gpio_16/J1_9
- TxD(ESP) - Gpio_17/J1_10
Extra Provosions
-
Button3 - Gpio_9
-
Button4 - Gpio_10
-
Button5 - Gpio_11
-
Button6 - Gpio_12
-
Conn1 - Gpio_2
-
Conn2 - Gpio_3
-
Conn3 - Gpio_4
-
Conn4 - Gpio_5
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R7, R8, R9, R11, R12, R14, R29, R31 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R13, R30 |
| 3 | BSS138 | BSS138:SOT95P240X111-3N | Q1, Q2, Q3 |
| 3 | IRFZ44NSTRLPBF | IRFZ44NSTRLPBF:DPAK254P1524X483-3N | MOSFET1, MOSFET2, MOSFET3 |
| 1 | 100uF/16V | Capacitor_SMD:CP_Elec_6.3x5.9 | C1 |
| 1 | 705530002 | 705530002:CONN3_53-0002_MOL | J3 |
| 1 | BBAI_P8 | Connector_PinSocket_2.54mm:PinSocket_2x23_P2.54mm_Vertical | J11 |
| 1 | BBAI_P9 | Connector_PinSocket_2.54mm:PinSocket_2x25_P2.54mm_Vertical | J10 |
| 1 | CaptureButton | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | Conn2 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-DEVKITC-1U-N8R2 | ESP32-S3-DEVKITC-1-N8R2:XCVR_ESP32-S3-DEVKITC-1-N8R2 | U1 |
| 1 | FlipButton | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | Conn4 |
| 1 | I2C | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J7 |
| 1 | SPI | digikey-footprints:PinHeader_1x4_P2.5mm_Drill1.1mm | J8 |
| 1 | ~ | Module:Pololu_Breakout-16_15.2x20.3mm | U2 |
Questions
How big is the Scout Board PCB?
It measures 104.1 × 61 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Scout Board use?
31 parts, built around the BSS138, IRFZ44NSTRLPBF, 100UF/16V and B2B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scout Board KiCad files?
From the vectech-dev/Scout_Board_pcb repository on GitHub, at the commit this page was made from: the board is Scout_Board.kicad_pcb and its schematic BBAI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scout Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask vectech-dev before reusing the design.
Similar boards
- 2 layers135 × 100 mm
- 2 layers100 × 65 mm
- 4 layers47 × 59.7 mm
Tackle sensor hardware
Celnardur/rfc_tackle_sensor
Open a git bash terminal in the directory of your choosing and call the following command:
79 parts3MIT - 4 layers275 × 240 mm
- 2 layers95 × 82 mm
Blanking board
BadenLab/poorlabs_stimulus_generator
A custom driver for Chrolis LED system from ThorLabs
23 partsGPL-3.0 - 4 layers95.5 × 91 mm
Brain PCB
oudehm/seniorDesignPCB
Editable KiCad projects for the brain, light, power, and pump boards.
86 parts - 2 layers43.3 × 32.3 mm
