2 layers180 × 125 mm
2 layers
ESPonics
Vault2501/ESPonics1WIP - ESP32 based Aeroponics system
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 39
- Pads
- 76
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jul 2023
- Updated
- 31 Oct 2024
Overview
ESPonics is an open-source printed circuit board by Vault2501, from the Vault2501/ESPonics repository on GitHub. It is a 2-layer board with 8 parts on 39 nets.
It is built around the ESP32-DEVKITC-VE and RJ45. Its parts include 4 connectors, 3 resistors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdESPonics
ESPonics is a ESP32 based automated Aeroponics system. It consists of fan, light and pump control as well as sensors for temperature, humidity, water level, ph and ec and is controlled via a web interface.
Status
This is still WIP
Done:
- Pump control
- Fan Control
- Light Control
- Test Web UI
Current WIP:
- Sensors
- Case models
Todo:
- Userfriendly UI
- Parameter configuration
- Automatic control
- PCB
Documentation
Documentation will go to the documentaiton folder
Media
Photos and Videos of this project can be found here:
- Grow and feeding container with pumps: https://pixel.tchncs.de/i/web/post/594626511061922875
- WIP main controller,sensor and light/fan modules: https://pixel.tchncs.de/i/web/post/594629490395300993
- Finished prototype modules: https://pixel.tchncs.de/i/web/post/597583425622062798
- Video testing the pumps: https://makertube.net/w/gAhuFigTPs9yXAJNz8wZ4G
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J1, J2, J3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R3 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U1 |
Questions
What parts does the ESPonics use?
8 parts, built around the ESP32-DEVKITC-VE and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESPonics KiCad files?
From the Vault2501/ESPonics repository on GitHub, at the commit this page was made from: the board is kicad/ESPonics/ESPonics.kicad_pcb and its schematic kicad/ESPonics/ESPonics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESPonics design in my own project?
Its repository states no licence, so its author keeps all rights: ask Vault2501 before reusing the design.
Similar boards
- 2 layers104.1 × 127 mm
- 2 layers140.1 × 160 mm
PracticeFieldTimer-38-pin ESP32s2
emintz/FirstRobotics
Projects that support First Robotics activities
28 parts1AGPL-3.0 - 2 layers86.4 × 52.1 mm
Esp Controller
UVMAirLabTrack/Track23
Under this folder are organized locations for all the .stl files used to create the various printed elements.
5 parts - 2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers115 × 75 mm
SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm
ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42 - 2 layers62.2 × 57.1 mm
