Skip to the content
2 layers26 × 19 mmSun sensor, the printed circuit board in 3D

A compact analog sun-sensor board that converts sunlight into a voltage signal using photodiodes, op-amps, and an ADC.

Size
26 × 19 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
13
Pads
84
Tracks, vias
184, 14
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 Jul 2026
Updated
14 Jul 2026

Overview

Sun sensor is an open-source printed circuit board by vatsalbansal123, from the vatsalbansal123/sun-sensor-pcb repository on GitHub. It is a 2-layer board of 26 × 19 mm with 29 parts on 13 nets, routed with 184 tracks and 14 vias.

It is built around the ADS1115IDGS and PDB-C154SM. Its parts include 9 capacitors, 6 resistors, 5 ICs, 4 diodes and 1 connector. It belongs with the sensors and measurement and audio and music boards of this library.

Main components

2

README

README.md

Sun Sensor PCB

A compact analog sun-sensor board that converts sunlight into a voltage signal using photodiodes, op-amps, and an ADC.

PCB Renders

FrontBack
PCB FrontPCB Back

Schematic

Schematic

Board at a glance

Photodiodes4× PDB-C154SM (LED1–LED4)
OP-Amps4× OPA320AIDBVR CMOS op-amps (U1–U4)
ADCADS1115IDGS 16-bit, 4-channel I2C ADC (U5)
CommunicationI²C, via 1×4 pin header (J1)
Power+3.3 V rail
Layers2-layer copper (F.Cu / B.Cu)
Outline~26.0 × 19.0 mm rounded-rectangular board, 4× mounting holes
Designed withKiCad 10

Key Components

ReferencePartFunction
LED1–LED4PDB-C154SMSilicon PIN photodiodes
U1–U4OPA320AIDBVRCMOS op-amps, one per photodiode channel
U5ADS1115IDGS16-bit, 4-channel, I2C-compatible ADC

Connectors & I/O

  • J1 — 1×4 pin header, 1.27 mm pitch (I²C: SDA / SCL, plus power/ground)

Passives & Discretes

  • Capacitors: 10pF (C1, C2, C5, C6 — op-amp feedback/compensation), 100n (C3, C4, C7, C8, C9 — decoupling), all 0603 SMD
  • Resistors: 3.3k (R1–R4 — op-amp feedback/gain, one per channel), 4.7k (R5, R6 — I²C pull-ups), all 0603 SMD

A full bill of materials can be regenerated from the schematic with:

text
kicad-cli sch export bom sun-sensor.kicad_sch -o bom.csv

Design Files

  • sun-sensor.kicad_sch — schematic
  • sun-sensor.kicad_pcb — PCB layout
  • sun-sensor.kicad_pro — KiCad project
  • OPA320AIDBVR/ — imported OPA320AIDBVR symbol, footprint, and 3D model
  • PDB_C154SM/ — imported PDB-C154SM photodiode symbol, footprints, and 3D model

Designed with KiCad 10.

Parts

29
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0603_1608MetricC3, C4, C7, C8, C9
410pFCapacitor_SMD:C_0603_1608MetricC1, C2, C5, C6
43.3kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_PadH1, H2, H3, H4
4OPA320AIDBVROPA320AIDBVR:SOT95P280X145-5NU1, U2, U3, U4
4PDB-C154SMfootprints:PDB-C154SM_ADP-MLED1, LED2, LED3, LED4
24.7kResistor_SMD:R_0603_1608MetricR5, R6
1ADS1115IDGSPackage_SO:TSSOP-10_3x3mm_P0.5mmU5
1Conn_01x04_PinConnector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_VerticalJ1

Similar boards

  • 2 layers32 × 34 mmReceiver, the printed circuit board in 3D

    Receiver

    vlc-utn/vlc_hardware

    9 parts1
  • 4 layers70 × 43 mmUSMU v10, the printed circuit board in 3D

    USMU v10

    joeltroughton/uSMU

    Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

    137 parts187
  • 4 layers66.3 × 40.2 mmCm4 drone, the printed circuit board in 3D

    Cm4 drone

    dridri/bcflight

    Raspberry Pi based drone flight controller and remote control

    56 parts175GPL-3.0
  • 4 layers192.1 × 126.9 mmStradex1, the printed circuit board in 3D

    Stradex1

    Bylin-code/Stradex1

    STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…

    24 parts101
  • 4 layers100 × 49.8 mmExpansion board, the printed circuit board in 3D

    Expansion board

    reubenstr/zuko

    A quadruped robot dog!

    75 parts51MIT
  • 2 layers96 × 74.4 mmMonolith, the printed circuit board in 3D

    Monolith

    luftaquila/monolith

    DIY wireless real-time datalogging platform for Student Formula and Baja.

    138 parts45
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 2 layers140.7 × 86.5 mmUPD board, the printed circuit board in 3D

    UPD board

    uniclogs/uniclogs-hardware

    University Class Open Ground Station Hardware

    185 parts32GPL-3.0

Questions

How big is the Sun sensor PCB?

It measures 26 × 19 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sun sensor use?

29 parts, built around the ADS1115IDGS and PDB-C154SM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sun sensor KiCad files?

From the vatsalbansal123/sun-sensor-pcb repository on GitHub, at the commit this page was made from: the board is sun-sensor.kicad_pcb and its schematic sun-sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sun sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask vatsalbansal123 before reusing the design.