8 layers120 × 60 mm
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
299 parts75MIT
2 layers26.7 × 49 mm
Trivial NodeMCU accelerometer board.
- Size
- 26.7 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 32
- Pads
- 58
- Tracks, vias
- 66, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Sep 2018
- Updated
- 22 Sep 2018
Overview
Accel is an open-source printed circuit board by vatral, from the vatral/nodemcu_accelerometer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 26.7 × 49 mm with 12 parts on 32 nets, routed with 66 tracks and 3 vias.
It is built around the LIS2HH12. Its parts include 2 capacitors, 2 resistors, 2 ICs and 2 diodes. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
Main components
1README
README.mdNodeMCU Amica Accelerometer
NodeMCU accelerometer board. This is a trivial test project.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 1 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1 |
| 1 | LIS2HH12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U2 |
| 1 | NodeMCU_Amica_R2 | nodemcu:NodeMCU_Amica_R2 | U1 |
Questions
How big is the Accel PCB?
It measures 26.7 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Accel use?
12 parts, built around the LIS2HH12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Accel KiCad files?
From the vatral/nodemcu_accelerometer repository on GitHub, at the commit this page was made from: the board is board/accel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Accel design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers117.5 × 30 mm
- 4 layers77.8 × 56.2 mm
- 2 layers35 × 99.5 mm
Povslinger
Jeija/esp8266-povslinger
Persistence of vision display using ESP8266 and APA102-2020
49 parts10 - 2 layers16.8 × 0.3 mm
Nrf peripheral pcb
torjeikenes/nrf_pig_performance
An activity tracker for pigs consisting of a BLE earchip for each pig, and a sentral that gathers data from each pig over BLE and sends it to the backend over NB-IoT.
23 parts1 - 2 layers62 × 83 mm
Vehicle Power Switch
custom-ds/Vehicle-Auto-On
With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.
49 partsGPL-3.0 - 4 layers
Pomodoro V1
MaxLell/Pomodoro_Clock
So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a up…
155 partsMIT - 4 layers17.5 × 50 mm
