

Dev board ch32x035
USB PD Power Supply using CH32X035
- Size
- 27.3 × 40.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 37
- Pads
- 123
- Tracks, vias
- 262, 37
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 Mar 2026
- Updated
- 26 Oct 2026
Overview
Dev board ch32x035 is an open-source printed circuit board by vanbwodonk, from the vanbwodonk/Digital-PD-PowerSupply repository on GitHub. It is a 2-layer board of 27.3 × 40.1 mm with 23 parts on 37 nets, routed with 262 tracks and 37 vias.
It is built around the CH32X035G8U6 and AO3401A. Its parts include 7 resistors, 5 capacitors, 5 connectors, 2 ICs and 2 diodes. It belongs with the power and microcontroller boards boards of this library.
Main components
2CH32X035G8U6
QFN-28(4X4)-40℃~+85℃ 12bit 20KB 27 3.3V、5V 32 Bit 48MHz 62KB Built-in FLASH RISC-V4C QFN-28(4X4) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdDigital USB-PD Power Supply
Low Cost USB Power Delivery adjustable power supply using CH32X035 RISC-V MCU.
- MCU: CH32X035G8U6 (WQFN-28), 48MHz RISC-V, USB PD PHY, USB 2.0 FS
- Power: USB Type-C PD (sink) → adjustable output voltage/current
- Peripherals: Rotary encoder control, OLED display, INA219 current sensing, USB CDC serial
- Firmware: C with ch32v003fun framework, PlatformIO build
- Hardware: Custom WQFN-28 dev board (KiCad design in
Hardware/)
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C6 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C2, C5 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 150k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 33u | Capacitor_SMD:C_1812_4532Metric | C4 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | CH32X035G8U6 | Package_DFN_QFN:WQFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm | U3 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J5 |
| 1 | Conn_01x14 | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J3 |
| 1 | Debugger | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | KF301-2P | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | CN2 |
| 1 | L78L33_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers90 × 60 mm

- 8 layers50 × 50 mm

USB C PSU
LeoDJ/USB-C_PD_PSU
A 5-60V bidirectional buck-boost-converter, also capable of 240W USB PD EPR (48V 5A)
149 parts29 - 4 layers50 × 50 mm

Pdaltmode
AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035
88 parts10LGPL-2.1 - 2 layers62 × 100 mm

ESP32-S3-HUB75-Driver
wszeto9/ESP32-S3-HUB75-Driver
This board serves as the Matrix Display driver for MIT's 2.007 gameboards in Spring 2024 and Spring 2025. The board can take 4 button inputs, Stemma-QT I2C sensors, and breaks out 8 GPIO pins for future use.
137 parts3MIT - 6 layers65.3 × 65 mm

Fast computer condom
American-Embedded/isolated_reindvstrialize_usb_hub
This repository contains a KiCad project template provided by American Embedded. It is designed to be a starting point for new electronic designs, pre-configured with common settings, layers, and manufacturing outputs.
157 parts1CERN-OHL-P-2.0 - 2 layers30 × 69 mm

- 4 layers107.1 × 32.4 mm

- 4 layers68 × 68 mm

Tile
Bruhdows/klink
Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.
122 parts
Questions
How big is the Dev board ch32x035 PCB?
It measures 27.3 × 40.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dev board ch32x035 use?
23 parts, built around the CH32X035G8U6 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dev board ch32x035 KiCad files?
From the vanbwodonk/Digital-PD-PowerSupply repository on GitHub, at the commit this page was made from: the board is Hardware/dev-board-ch32x035/dev-board-ch32x035.kicad_pcb and its schematic Hardware/dev-board-ch32x035/dev-board-ch32x035.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dev board ch32x035 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vanbwodonk before reusing the design.