

Temporarycircuit
KiCad PCB design projects for VacuumSens.
- Size
- 40.8 × 80.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 97
- Pads
- 283
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jan 2026
- Updated
- 13 May 2026
Overview
Temporarycircuit is an open-source printed circuit board by vacuumsens, from the vacuumsens/pcb repository on GitHub. It is a 2-layer board of 40.8 × 80.5 mm with 70 parts on 97 nets.
It is built around the MCP73871EV, MT3608 and ADS1115IDGSR, with the CJQ4435, SS34 and DS1037-15FNAKT74-0CC among its other parts. Its parts include 23 resistors, 16 capacitors, 8 ICs, 7 transistors and 6 diodes.
Main components
6MCP73871EV
-ModulesMicrochip TechnologyMT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersADS1115IDGSR
VSSOP-10-40℃~+125℃ 16 1LSB 2 2.048V 2V~5.5V 500nA 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)CJQ4435
SOP-81 P-Channel 1.35nF 1.4W 185pF 215pF 30V 35mΩ@4.5V 3V 50nC@10V 9.1A P-Channel ±20V SOP-8 MOSFETs ROHSJiangsu Changjing Electronics Technology (CJ)MOSFETsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesDS1037-15FNAKT74-0CC
弯插-40℃~+105℃ 15P 2 3A Black Female Right Angle Standard D-Sub 弯插 D-Sub / VGA Connectors ROHSCONNFLYD-Sub / VGA Connectors
README
README.mdPCB Schematic Projects
KiCad PCB design projects for VacuumSens.
Project Structure
SchematicProjects/
├── libs/ # Centralized component libraries
│ ├── easyeda2kicad.kicad_sym
│ ├── easyeda2kicad.pretty/
│ └── easyeda2kicad.3dshapes/
├── charging-circuit/V1/ # Charging circuit project
├── RS232-converter/V1/ # RS232 converter project
└── ...Importing Components from EasyEDA/LCSC
There are two methods to import components:
Method 1: Command Line (easyeda2kicad)
Best for batch imports or when you know the LCSC part number.
Prerequisites
Install the easyeda2kicad Python tool:
pip install easyeda2kicadImport a Component
Use the alias (already configured in .zshrc):
easyeda2kicad-import <LCSC_ID>Example:
easyeda2kicad-import C49018This downloads the symbol, footprint, and 3D model to the centralized libs/ folder.
Manual Import (without alias)
easyeda2kicad --full --overwrite --output /Users/andrewyanez/Documents/KiCad/7.0/symbols/SchematicProjects/libs --lcsc_id C49018Method 2: KiCad Plugin (EasyEDA/LCSC Plugin)
Best for browsing and importing directly within KiCad.
Installation
- In KiCad, go to Plugin and Content Manager
- Search for "EasyEDA" or "LCSC"
- Install the plugin
Usage
- Open your KiCad project
- Go to Tools → EasyEDA Library (or similar menu item)
- Search for a component by name or LCSC part number
- Click Import - the plugin will create:
LCSC/EasyEDA.kicad_sym(symbols)LCSC/EasyEDA.pretty/(footprints)LCSC/EasyEDA.3dshapes/(3D models)
Note: The plugin saves files locally in your project folder under LCSC/. This is project-specific, not centralized.
After Importing (Both Methods)
- Open your KiCad project
- The library should be available in the schematic/PCB editor
- Add the new symbol/footprint to your design
- Commit changes to git:
bash git add -A && git commit -m "Add component CXXXXX" git push
Which Method to Use?
| Method | Pros | Cons |
|---|---|---|
| easyeda2kicad (CLI) | Centralized in libs/, shared across projects | Requires terminal |
| KiCad Plugin | Visual browsing, integrated in KiCad | Project-local, can create duplicates |
Recommendation: Use the CLI for components you'll reuse. Use the plugin for quick project-specific imports.
Library Configuration
Projects reference the centralized library using relative paths:
sym-lib-table:
(lib (name "easyeda2kicad")(type "KiCad")(uri "${KIPRJMOD}/../../libs/easyeda2kicad.kicad_sym"))fp-lib-table:
(lib (name "easyeda2kicad")(type "KiCad")(uri "${KIPRJMOD}/../../libs/easyeda2kicad.pretty"))Finding LCSC Part Numbers
- Go to LCSC.com or JLCPCB Parts
- Search for your component
- The LCSC part number starts with "C" (e.g., C49018)
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | PCM_JLCPCB:C_0603 | C2, C12, C17, C18, C19, C20, C21 |
| 6 | 22uF | PCM_JLCPCB:C_0603 | C3, C4, C5, C7, C10, C11 |
| 5 | 10kΩ | PCM_JLCPCB:R_0603 | R5, R14, R15, R16, RPROG3 |
| 5 | 5.1kΩ | PCM_JLCPCB:R_0603 | R1, R2, R12, R13, R21 |
| 4 | 1kΩ | PCM_JLCPCB:R_0603 | RPROG1, RPROG4, RPROG5, RPROG6 |
| 3 | 22uH | easyeda2kicad:IND-SMD_L7.5-W7.5 | L1, L2, L3 |
| 3 | 2N7002 | easyeda2kicad:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1, Q4, Q6 |
| 3 | 470Ω | PCM_JLCPCB:R_0603 | R6, R7, R11 |
| 3 | CJQ4435 | easyeda2kicad:SOP-8_L5.0-W4.0-P1.27-LS6.2-BL | Q2, Q5, Q7 |
| 3 | SS34 | PCM_JLCPCB:D_SMA | D4, D5, D6 |
| 2 | 4.7uF | PCM_JLCPCB:C_0603 | C1, C6 |
| 2 | MT3608 | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U2, U3 |
| 1 | 100Ω | PCM_JLCPCB:R_0603 | R22 |
| 1 | 10uF | PCM_JLCPCB:C_0603 | C8 |
| 1 | 2.2kΩ | PCM_JLCPCB:R_0603 | R20 |
| 1 | 2.54-2*20 | easyeda2kicad:HDR-TH_40P-P2.54-V-F-R2-C20-S2.54 | U7 |
| 1 | 20kΩ | PCM_JLCPCB:R_0603 | R4 |
| 1 | 22kΩ | PCM_JLCPCB:R_0603 | R10 |
| 1 | 240kΩ | PCM_JLCPCB:R_0603 | R23 |
| 1 | 2kΩ | PCM_JLCPCB:R_0603 | R19 |
| 1 | 3kΩ | PCM_JLCPCB:R_0603 | R3 |
| 1 | 4.7kΩ | PCM_JLCPCB:R_0603 | R9 |
| 1 | 6.8kΩ | PCM_JLCPCB:R_0603 | R18 |
| 1 | 91kΩ | PCM_JLCPCB:R_0603 | R8 |
| 1 | ADS1115IDGSR | easyeda2kicad:MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U9 |
| 1 | Battery Input | easyeda2kicad:CONN-TH_S2B-PH-K-S-GW | U5 |
| 1 | DS1037-15FNAKT74-0CC | easyeda2kicad:DSUB-TH_DS1037-15FNAKT74-0CC | DSub1 |
| 1 | Green | PCM_JLCPCB:D_0805 | D3 |
| 1 | Heater+TempPins | easyeda2kicad:HDR-TH_6P-P2.54-H-M-W10.0 | J4 |
| 1 | MAX3232CDBR | easyeda2kicad:SSOP-16_L6.2-W5.3-P0.65-LS7.8-BL | U8 |
| 1 | MCP73871 | easyeda2kicad:QFN-20_L4.0-W4.0-P0.5-BL-EP | U4 |
| 1 | MT3608 | PCM_JLCPCB:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U6 |
| 1 | Red | PCM_JLCPCB:D_0805 | D1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | easyeda2kicad:TYPE-C-SMD_TYPE-C-6P | J1 |
| 1 | Yellow | PCM_JLCPCB:D_0805 | D2 |
| 1 | currentmirror | easyeda2kicad:SOT-363-6_L2.2-W1.3-P0.65-LS2.1-BL | Q3 |
More from vacuumsens/pcb
7- 2 layers82.6 × 94.6 mm

- 2 layers40.8 × 83.5 mm

- 2 layers49.5 × 35 mm

- 2 layers

- 2 layers43.9 × 42.4 mm

- 2 layers66 × 81.3 mm

- 2 layers32.4 × 21 mm

Similar boards
- 4 layers160.7 × 51.7 mm

- 4 layers154.5 × 112.9 mm

LibrePLC32
AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.
295 parts14CERN-OHL-P-2.0 - 4 layers92 × 56 mm

REIN R1
rein-baremetal/REIN_R1_KiCad
Dual-MCU baremetal embedded development board featuring high-speed QSPI storage, hardware USB hub, and flexible power management. Open for PCB trace routing collaboration
177 parts2 - 2 layers65 × 56 mm

- 4 layers195 × 159 mm

- 2 layers100 × 100 mm

Carrier
moinsen-dev/open-bed-climate
Open-source, local-first bed climate system: water-cooled/heated mat, standard parts, DIY kits, Home Assistant. Design phase.
126 partsApache-2.0 - 4 layers110 × 90 mm

FilMachine Mainboard
yesnoj/FilMachine_Reworked
FilMachine is an automated film processing machine designed for photographic film development. It handles the entire process: chemical baths, water rinses, temperature regulation, and motor-driven film agitation — all…
205 parts - 4 layers100 × 80 mm

Lamp rev a
laminarforge/laminarforge-cad
Parametric CAD models (Rust + vcad) for LaminarForge open-source LAMP diagnostics device
107 parts
Questions
How big is the Temporarycircuit PCB?
It measures 40.8 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Temporarycircuit use?
70 parts, built around the MCP73871EV, MT3608, ADS1115IDGSR and CJQ4435. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Temporarycircuit KiCad files?
From the vacuumsens/pcb repository on GitHub, at the commit this page was made from: the board is TESTPCB/charging-circuit/temporarycircuit.kicad_pcb and its schematic Archives/Individual Circuits/3S/3S-Battery/3S-Battery.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Temporarycircuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask vacuumsens before reusing the design.