
Nixie board
vascofazza/cloxie_nixie_clock
Schematics and code for Cloxie: my Nixie Tube Clock.

Custom PCB for having addressable RGB LEDs driven by an ESP12 (ESP8266) with WLED firmware in a star shaped Christmas ornament normally meant for a tea light
RGBchristmasStar is an open-source printed circuit board by vacuumSpark, from the vacuumSpark/RGBchristmasStar repository on GitHub, published under the MIT licence. It is a 2-layer board of 190 × 180.7 mm with 49 parts on 38 nets, routed with 208 tracks and 58 vias.
It is built around the WEMOS D1 MINI and WS2812B. Its parts include 22 capacitors, 22 diodes and 1 IC. It belongs with the ESP8266 boards of this library.
Custom PCB for having addressable RGB LEDs driven by an ESP12 (ESP8266) with WLED firmware in a star shaped Christmas ornament normally meant for a tea light
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 +6 |
| 22 | WS2812B | lib_fp:WS2812B-Mini | D1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +6 |
| 1 | WeMos_D1_mini | lib_fp:WEMOS_D1_mini_light_SMD_header | U1 |
The 45 most common of 49 parts.

vascofazza/cloxie_nixie_clock
Schematics and code for Cloxie: my Nixie Tube Clock.

SWAT-engineering/kiwi-air-monitor
Kiwi monitor is an open source CO2/Humidity/Temperature sensor intended for monitoring the quality of the air in a room. Kiwi was created to support teachers with a notification to ventilate their classroom.

c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.

Hasenpups/PN5180_ESP_Reader
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

lugsaar/ESP8266XmasTree
ESP8266 based PCB Xmas tree with WS2812B LEDs as Christmas lights. The Christmas tree can be easily controlled with systems like Tasmota or ESPHome.



Hanra-s-work/cat_feeder
This is the repository that will contain the IOT project.
It measures 190 × 180.7 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the WEMOS D1 MINI and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vacuumSpark/RGBchristmasStar repository on GitHub, at the commit this page was made from: the board is RGBchristmasStar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).