

(mine doesn't look as fancy but we're getting somewhere lol)
- Size
- 38.3 × 51.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 43
- Pads
- 215
- Tracks, vias
- 426, 45
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jan 2026
- Updated
- 6 Jul 2026
Overview
4lfo is an open-source printed circuit board by v1peridae, from the v1peridae/v1permodsynth repository on GitHub. It is a 4-layer board of 38.3 × 51.7 mm with 60 parts on 43 nets, routed with 426 tracks and 45 vias.
Its parts include 34 resistors, 12 capacitors, 4 ICs, 4 diodes and 1 connector.
README
README.mdThis is the v1permodsyth
- A modular sythesiser is an electronic music instrument made of different sythesiser modules! (who wouldve guessed)
- They look something like this:
(mine doesn't look as fancy but we're getting somewhere lol)
it currently has:
-
square vco
-
vca
- guitar input
-ar
-4lfo
-fm drums
more on the process
i've never really made anything this complex so i totally understand if it might not work on the first go but i'm really happy with how far i've gotten with this. if you'd like to learn more about the making process check out my JOURNAL.md
credits to https://www.bartonmusicalcircuits.com/ which is where i learnt how to do all of this :)
casing - it currently doesnt have a case but i have all the measurements and hope to build a wooden or hard cardboard case
note on commits: guh it totally skipped my mind to make frequent commits of this so i accept my fate if it means my hours get reduced since this is one is on me.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1K | Resistor_SMD:R_0805_2012Metric | R6, R7, R9, R11, R12, R13, R22, R23, R24, R25, R28, R29 |
| 6 | .01uF | Capacitor_SMD:C_0805_2012Metric | C1, C8, C9, C10, C11, C12 |
| 6 | 10uF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C4, C5, C6, C7 |
| 4 | 100K | Resistor_SMD:R_0805_2012Metric | R2, R10, R15, R33 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R8, R26, R27, R32 |
| 4 | 2.2K | Resistor_SMD:R_0805_2012Metric | R4, R18, R20, R30 |
| 4 | 2.7K | Resistor_SMD:R_0805_2012Metric | R5, R19, R21, R31 |
| 4 | 220K | Resistor_SMD:R_0805_2012Metric | R3, R16, R17, R34 |
| 4 | LED | LED_SMD:LED_1206_3216Metric | D1, D2, D3, D4 |
| 4 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3, U4 |
| 2 | 10 | Resistor_SMD:R_0805_2012Metric | R1, R14 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | RATE1 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | RV1 |
| 1 | RATE2 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | RV4 |
| 1 | RATE3 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | RV2 |
| 1 | RATE4 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | RV3 |
More from v1peridae/v1permodsynth
5- 4 layers74.4 × 85.1 mm

- 2 layers94.2 × 96.6 mm

- 2 layers65.2 × 41.2 mm

Squarevco
v1peridae/v1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
42 parts - 2 layers39.1 × 38.1 mm

Guitar input eg
v1peridae/v1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
34 parts - 2 layers86 × 38.2 mm

V1permodsynth
v1peridae/v1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
28 parts
Similar boards
- 4 layers220 × 65 mm

XG Mobile Dock Lite
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
60 parts712CC-BY-4.0 - 4 layers54 × 106 mm

DaisySeedPedal1590b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
60 parts559MIT - 4 layers25.4 × 58.5 mm

Shrike lite
vicharak-in/shrike
Low cost microcontroller + FPGA board for makers , hobbyist and student for endless possibility.
60 parts537GPL-2.0 - 4 layers60 × 37 mm

Ff power pcb
o7-machinehum/wifiwart
Linux SBC featuring two wifi radios, masquerading as a USB charger.
60 parts184MIT - 4 layers51 × 48 mm

- 4 layers29 × 20.9 mm

Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
60 parts81MIT - 4 layers99 × 91.7 mm

- 4 layers52.8 × 61.2 mm

GameboyCartridgeV1.3
shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.
60 parts72CERN-OHL-P-2.0
Questions
How big is the 4lfo PCB?
It measures 38.3 × 51.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 4lfo use?
60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4lfo KiCad files?
From the v1peridae/v1permodsynth repository on GitHub, at the commit this page was made from: the board is lfo/4lfo/4lfo.kicad_pcb and its schematic ar/ar/ar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4lfo design in my own project?
Its repository states no licence, so its author keeps all rights: ask v1peridae before reusing the design.