

Balsamic
- Size
- 17.6 × 28.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 94
- Pads
- 263
- Tracks, vias
- 649, 169
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 May 2026
- Updated
- 11 May 2026
Overview
Balsamic is an open-source printed circuit board by uw-x, from the uw-x/vuebuds repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 17.6 × 28.5 mm with 55 parts on 94 nets, routed with 649 tracks and 169 vias.
It is built around the ISP1807-LR-RS, BMI270 and MAX77650BEWV+T, with the AXT524124 and B3U-1000P among its other parts. Its parts include 18 capacitors, 7 resistors, 3 ICs, 2 diodes and 2 connectors.
Main components
5ISP1807-LR-RS
SMD,8x8mmMesh networking、Low-power secure connection SMD,8x8mm Bluetooth Modules ROHSInsight SiPBluetooth ModulesBMI270
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 3.5uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometersMAX77650BEWV+T
WLP-30(2.2x2.8)-40℃~+85℃ 1 2.7V~5.5V 4.6V Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Under-voltage lockout、Overvoltage protection、Battery temperature monitoring WLP-30(2.2x2.8) Power Management - Specialized ROHSMaxim Integrated (Analog Devices)Battery ManagementAXT524124
SMD,P=0.4mm-55℃~+85℃ 0.4mm 2 24P 300mA 60V Gold Surface Mount,Vertical SMD,P=0.4mm Board-to-Board and Backplane Connector ROHSPanasonicBoard-To-Board And Backplane ConnectorB3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10uF | Capacitor_SMD:C_0402_1005Metric | C5, C8, C9, C12, C13, C15, C17 |
| 3 | 10K | Resistor_SMD:R_0201_0603Metric | R2, R3, R5 |
| 2 | 100nF | Capacitor_SMD:C_0201_0603Metric | C6, C14 |
| 2 | 100nf | Capacitor_SMD:C_0201_0603Metric | C16, C18 |
| 2 | 220 | Resistor_SMD:R_0201_0603Metric | R4, R6 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C1, C11 |
| 2 | 4.7K | Resistor_SMD:R_0201_0603Metric | R7, R8 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C2, C7 |
| 2 | GREPOW_Battery | footprints:balsamic_grepow_battery | BT1, BT2 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 1 | 1.5uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 3300pF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | AXT524124 | footprints:PANASONIC_AXT524124 | J2 |
| 1 | B3U-1000P | footprints:SW_B3U-1000P | S1 |
| 1 | BMI270 | footprints:XDCR_BMI270 | U1 |
| 1 | CLK | custom_testpoints:TestPoint_Pad_D0.5mm | TP8 |
| 1 | CS | custom_testpoints:TestPoint_Pad_D0.5mm | TP9 |
| 1 | D0 | custom_testpoints:TestPoint_Pad_D0.5mm | TP15 |
| 1 | D1 | custom_testpoints:TestPoint_Pad_D0.5mm | TP14 |
| 1 | D2 | custom_testpoints:TestPoint_Pad_D0.5mm | TP13 |
| 1 | D3 | custom_testpoints:TestPoint_Pad_D0.5mm | TP12 |
| 1 | FVLD | custom_testpoints:TestPoint_Pad_D0.5mm | TP20 |
| 1 | INT | custom_testpoints:TestPoint_Pad_D0.5mm | TP18 |
| 1 | INT1 | custom_testpoints:TestPoint_Pad_D0.5mm | TP5 |
| 1 | INT2 | custom_testpoints:TestPoint_Pad_D0.5mm | TP4 |
| 1 | ISP1807-LR-RS | footprints:ISP1807-LR-RS | U3 |
| 1 | LOGO | footprints:ring-logo | G*** |
| 1 | LVLD | custom_testpoints:TestPoint_Pad_D0.5mm | TP19 |
| 1 | MAX77650BEWV+T | footprints:21-100047A_W302H2&plus_1_MXM | U4 |
| 1 | MCLK | custom_testpoints:TestPoint_Pad_D0.5mm | TP17 |
| 1 | MISO | custom_testpoints:TestPoint_Pad_D0.5mm | TP6 |
| 1 | MOSI | custom_testpoints:TestPoint_Pad_D0.5mm | TP7 |
| 1 | PCLK | custom_testpoints:TestPoint_Pad_D0.5mm | TP16 |
| 1 | RX | custom_testpoints:TestPoint_Pad_D0.5mm | TP11 |
| 1 | TRIG | custom_testpoints:TestPoint_Pad_D0.5mm | TP21 |
| 1 | TX | custom_testpoints:TestPoint_Pad_D0.5mm | TP10 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J3 |
More from uw-x/vuebuds
1- 4 layers22.4 × 12 mm

Similar boards
- 4 layers41.6 × 36 mm

Epaper smart watch
AeroX2/aerox2.github.io
One repository and npm installation builds the workshop at jamesridey.dev and the professional site at cv.jamesridey.dev.
102 parts - 6 layers41.5 × 61.7 mm

- 4 layers46 × 46 mm

U anemometer
PandoroML/LOAF
LOAF (Local Observations and Atmospheric Forecasting) is an open source hyperlocal weather forecasting combining gridded forecasts with local station observations using machine learning and open-source hardware.
144 parts14MIT - 4 layers72.8 × 75 mm

Rover circuit
Project-Emerge/rover-circuit
The Rover Circuit is a comprehensive controller board designed for robotics applications, specifically targeted at robot rovers.
108 partsMIT - 4 layers190.8 × 12.1 mm

- 2 layers

Device
MalekItani/WirelessHardware
PCB design files for the hardware used in Wireless earbuds for low-cost hearing screening
55 parts11MIT - 6 layers260.1 × 92.9 mm

Wafer keyboard v3
oleksandrmaslov/wafer-zmk-config
Wafer is the custom, ultra-thin mechanical keyboard built on nrf52840, with full NPM1300 integration and (custom spring) PG1316s switches.
150 parts7 - 2 layers26 × 40 mm

Nervous EDA
sensors-inl/Nervous-EDA
ECAD design files, firmware source code and standalone application for the EDA sensor of the Nervous project.
55 parts3MIT
Questions
How big is the Balsamic PCB?
It measures 17.6 × 28.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Balsamic use?
55 parts, built around the ISP1807-LR-RS, BMI270, MAX77650BEWV+T and AXT524124. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Balsamic KiCad files?
From the uw-x/vuebuds repository on GitHub, at the commit this page was made from: the board is hw/balsamic 2-backups/balsamic 2-2023-10-12_115921/balsamic.kicad_pcb and its schematic hw/balsamic 2-backups/balsamic 2-2023-09-21_143114/balsamic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Balsamic design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).