

Dash Left
All the Boards We Make
- Size
- 86.4 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 56
- Pads
- 201
- Tracks, vias
- 383, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Mar 2021
- Updated
- 25 Mar 2021
Overview
Dash Left is an open-source printed circuit board by uvmaero, from the uvmaero/AERO_Boards repository on GitHub. It is a 2-layer board of 86.4 × 76.2 mm with 45 parts on 56 nets, routed with 383 tracks and 54 vias.
It is built around the ATMEGA328P-AU, MCP2551-I/SN-HG and R-785.0-1.0, with the STP16CP05T and MF-MSMF050-2 among its other parts. Its parts include 17 resistors, 8 capacitors, 6 ICs, 5 diodes and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MCP2551-I/SN-HG
SOP-8SOP-8 CAN Transceivers ROHSHGSEMICAN TransceiversR-785.0-1.0
SIP-31 1A 5V 5W 6.5V~18V 94% SIP-3 Isolated Power Modules ROHSRECOM PowerIsolated Power ModulesSTP16CP05T
TSSOP-24-40℃~+125℃ 100mA 16 20V 30MHz 3V~5.5V 5% Analog、PWM Built-in TSSOP-24 LED Drivers ROHSSTMicroelectronicsLED DriversMF-MSMF050-2
1812-40℃~+85℃ 100A 150mΩ 15V 1A 1Ω 3.2mm 5.4mm 500mA 1812 Resettable Fuses ROHSBournsResettable Fuses
README
README.mdAERO_Boards
All the Boards We Make
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C6, C7, C8 |
| 4 | LED_RGBA | LED_THT:LED_D5.0mm-4_RGB | D2, D3, D4, D5 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 10K TRIM | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 16MHz | AERO_CUSTOM:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LOGO | AERO_CUSTOM:AERO_Logo_15x6mm | G*** |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U5 |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MF-MSMF050 | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | R-785.0-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
| 1 | RC1602A | Display:RC1602A | U3 |
| 1 | STP16CP05 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U4 |
More from uvmaero/AERO_Boards
12- 2 layers

- 2 layers78.7 × 69.2 mm

- 2 layers134.6 × 96.5 mm

- 2 layers3.8 × 14 mm

- 2 layers99.7 × 67.9 mm

- 2 layers49.5 × 59.7 mm

- 2 layers61 × 41.3 mm

- 2 layers61 × 32.2 mm

- 2 layers27.9 × 21.6 mm

- 2 layers57.1 × 31.1 mm

- 2 layers97.8 × 52.1 mm

- 2 layers

Similar boards
- 2 layers90 × 50 mm

- 2 layers100 × 60 mm

ORA Control Board Rev 1.1
gtrupiano/ECE-4998
Senior Design implementation for Electrical Subsystems work for ORA's IGVC Robot
69 parts - 2 layers139 × 190 mm

Programmable precision resistor
sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor
253 parts65BSD-3-Clause - 2 layers274.3 × 30.5 mm

Numitron2
74hc595/Numitron-Clock
An alarm clock using 9-segment numitron displays
56 parts6BSD-3-Clause - 2 layers27 × 21.6 mm

Unix wall clock
dotcypress/unix-wall-clock
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or…
9 parts1Apache-2.0 - 2 layers

- 2 layers54.6 × 44.4 mm

- 2 layers285 × 152 mm

Questions
How big is the Dash Left PCB?
It measures 86.4 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dash Left use?
45 parts, built around the ATMEGA328P-AU, MCP2551-I/SN-HG, R-785.0-1.0 and STP16CP05T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dash Left KiCad files?
From the uvmaero/AERO_Boards repository on GitHub, at the commit this page was made from: the board is Dash/Dash_Left/Dash_Left.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dash Left design in my own project?
Its repository states no licence, so its author keeps all rights: ask uvmaero before reusing the design.