

Fuel gauge
Printed Circuit Boards (PCBs) for UviSpace
- Size
- 99.9 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 31
- Pads
- 117
- Tracks, vias
- 339, 15
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Jul 2017
- Updated
- 26 Feb 2019
Overview
Fuel gauge is an open-source printed circuit board by UviDTE-UviSpace, from the UviDTE-UviSpace/pcb-designs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.9 × 70 mm with 41 parts on 31 nets, routed with 339 tracks and 15 vias.
It is built around the AQV252G, SN74LVC1G08DBVR and BQ34Z100PW, with the BSS138 and BSS84 among its other parts. Its parts include 15 resistors, 6 capacitors, 4 ICs, 4 connectors and 3 diodes.
Main components
5AQV252G
DIP-61.14V 1.5kV 250us 60V 80mΩ One set normally open: 2A (SPST - normally open) DIP-6 Solid State Relays (MOS Output) ROHSPanasonicSolid State Relays (MOS Output)SN74LVC1G08DBVR
SOT-23-5-40℃~+85℃ 1 1.65V~5.5V 1.7V、2V 100nA 2 3.4ns@5V,15pF 32mA 32mA 350mV 4V 700mV、800mV 74LVC AND Gate Local shutdown mode SOT-23-5 Logic Gates ROHSTWGMCLogic GatesBQ34Z100PW
TSSOP-14-40℃~+85℃ 140uA 2.7V~4.5V I2C、HDQ Lithium Battery、LiFePO4 Battery Monitoring IC Not supported Support TSSOP-14 Battery Management ROHSTexas InstrumentsBattery Management ICsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100 | myfootprint:R_0805_My_HandSoldering | R7, R8, R12, R13, R14, R15 |
| 4 | 0.1u | myfootprint:C_0805_HandSoldering | C2, C3, C4, C6 |
| 3 | 10k | myfootprint:R_0805_My_HandSoldering | R6, R10, R11 |
| 3 | CONN_01X04 | footprint:CONN_01X04 | P1, P2, P3 |
| 2 | Mounting_Hole | footprint:Mounting_hole | MH1, MH2 |
| 1 | .010 | myfootprint:R_2010_My_HandSoldering | R5 |
| 1 | 100K | footprint:R_0805_My_HandSoldering | RComp1 |
| 1 | 100k | myfootprint:R_0805_My_HandSoldering | R3 |
| 1 | 16.5k | myfootprint:R_0805_My_HandSoldering | R1 |
| 1 | 165k | myfootprint:R_0805_My_HandSoldering | R4 |
| 1 | 1u | myfootprint:C_0805_HandSoldering | C5 |
| 1 | 200 | footprint:R_0805_My_HandSoldering | R9 |
| 1 | 2N7002 | myfootprint:SOT-23_Handsoldering | Q3 |
| 1 | 3300p | myfootprint:C_0805_HandSoldering | C1 |
| 1 | 390 | footprint:R_0805_My_HandSoldering | RRy1 |
| 1 | 400K | footprint:R_0805_My_HandSoldering | RComp2 |
| 1 | AQV252G | DIP-6_W7.62mm | U1 |
| 1 | AZ23C5V6-7 | footprint:D_SOT-23_NKA | D2 |
| 1 | AZ23C5V6-7 | myfootprint:D_SOT-23_NKA | D3 |
| 1 | BSS138 | myfootprint:BSS138-SOT-23_Handsoldering | Q2 |
| 1 | BSS84 | myfootprint:BSS84-SOT-23_Handsoldering | Q1 |
| 1 | BZT52C5V65-7 | myfootprint:SOD-323 | D1 |
| 1 | CONN_01X02 | footprint:CONN_01X02 | P4 |
| 1 | Customizable | myfootprint:R_0805_My_HandSoldering | R2 |
| 1 | SN74LVC1G08DBVR | footprint:SOT-23-5_HandSoldering | U2 |
| 1 | Switch_SPDT_x2 | footprint:SW1-DIP-8-_6_Handsoldering | SW1 |
| 1 | TLV3691IDCKR | footprint:SC-70-5_Handsoldering | U3 |
| 1 | bq34z100pw | footprint:SSOP-14-Bq | U4 |
More from UviDTE-UviSpace/pcb-designs
3- 2 layers160 × 100 mm

- 2 layers100 × 22.8 mm

- 2 layers100 × 57.8 mm

Similar boards
- 2 layers160 × 100 mm

- 2 layers40 × 40 mm

- 2 layers136.2 × 85.9 mm

BATDATUNIT01
mlab-modules/BATDATUNIT01
Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.
225 parts5GPL-3.0 - 2 layers80.8 × 60.5 mm

- 2 layers

LION1CELL02
mlab-modules/LION1CELL02
Single-cell Li-Ion Battery management system with I2C interface
93 partsGPL-3.0 - 2 layers80.8 × 70.6 mm

SOLARMINIBAT01
mlab-modules/SOLARMINIBAT01
Small low-power photovoltaic MPPT module with LTO battery
79 partsGPL-3.0 - 4 layers90 × 80 mm

- 2 layers44.2 × 29.3 mm

Questions
How big is the Fuel gauge PCB?
It measures 99.9 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fuel gauge use?
41 parts, built around the AQV252G, SN74LVC1G08DBVR, BQ34Z100PW and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fuel gauge KiCad files?
From the UviDTE-UviSpace/pcb-designs repository on GitHub, at the commit this page was made from: the board is fuel-gauge/KiCad/PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fuel gauge design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).