
Controlboard
ut-ras/chessbot
Python/MQTT software, Raspberry Pi Config files, PCB Schematics for an autonomous chess playing robot

Python/MQTT software, Raspberry Pi Config files, PCB Schematics for an autonomous chess playing robot
Chessboard2 is an open-source printed circuit board by ut-ras, from the ut-ras/chessbot repository on GitHub. It is a 2-layer board of 240 × 12 mm with 78 parts on 65 nets, routed with 723 tracks and 75 vias.
It is built around the WS2814F and AO3401A. Its parts include 24 capacitors, 17 resistors, 16 ICs, 8 diodes and 8 transistors. It belongs with the robots and motor control boards of this library.
ChessBot is an innovative project developed by the IEEE RAS - Demobots team. It is a CNC-inspired automated chessboard designed to enhance the experience of playing chess. Using an actuated electromagnet gantry system, ChessBot can move magnetized chess pieces across the board autonomously, allowing for a seamless game between two players or against a computer-controlled opponent. The project aims to merge the ancient game of chess with modern technology, providing a unique and interactive experience.
Automated Piece Movement: Moves chess pieces using an electromagnet on a step-driven gantry system, controlled under the board.
Magnetized Chess Pieces: Each piece is magnetized for precise and secure movement. Piece movements are detected via 3D magnetic sensors underneath each square.
Player vs. Computer Mode: Play against an AI with adjustable difficulty settings.
Two-Player Online Mode: Enjoy an enhanced tele-chess experience with automated piece movements that reflect your partner's movements from across the internet using Lichess
Make sure you have Python 3.6 or higher installed on your system. You can download it from the official Python website.
If on Windows use WSL for now, as the code is not tested on Windows.
git clone https://github.com/ut-ras/chessbot.git cd chessbot
pip install -r requirements.txtsudo apt-get install stockfish && which stockfishThe output of the which stockfish command will be the path to the stockfish binary. Copy that path, you will need this for the python script.
In the python/bitboard_with_stockfish.py file, change the stockfish_path variable to the path of the stockfish binary you found in the previous step.
Run the Python script:
python python/bitboard_with_stockfish.pypython/bitboard_with_stockfish.py - This is the main file that runs the chess engine. It uses the python-chess library to interface with the Stockfish chess engine. The bitboard implementation is a custom implementation that uses 64-bit integers to represent the chessboard. Makes calls to functions in python/display_output.py, animates the board for a 128x64 display, currently only makes the bitmap.
Bitboards are 64bit integer representations of the entire chessboard. 8x8 squares = 64 squares, so a digital for each individual square, that digit is 1 when a piece is on the corresponding square and 0 when a piece is absent from the square.
So far we arent using any "standard" bitboard implementations, as our situation is a tad unique. Most chess engines that utilize 12 bitboards, one for each piece type, ( [pawn + knight + bishop + rook + queen + king] * 2 teams = 12 piece types).
Here is a diagram of how each space on the chessboard is indexed in the bitboard, the number at each square is the digital that is either high or low depending on if a piece is there or not. For example, square a4 is position 32
8 | 0 1 2 3 4 5 6 7
7 | 8 9 10 11 12 13 14 15
6 | 16 17 18 19 20 21 22 23
5 | 24 25 26 27 28 29 30 31
4 | 32 33 34 35 36 37 38 39
3 | 40 41 42 43 44 45 46 47
2 | 48 49 50 51 52 53 54 55
1 | 56 57 58 59 60 61 62 63
-------------------------
a b c d e f g h| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +8 |
| 9 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R15, R17 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6, R8, R10, R12, R14, R16 |
| 8 | AO3401A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | LED_RGAB | LED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D9, D10, D11, D12, D13, D14, D15, D16 |
| 8 | TMAG5273 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2, U4, U6, U8, U10, U12, U14, U16 |
| 8 | WS2814F | 0chessbot:FSOP-8 | U1, U3, U5, U7, U9, U11, U13, U15 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J2 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |

ut-ras/chessbot
Python/MQTT software, Raspberry Pi Config files, PCB Schematics for an autonomous chess playing robot

ut-ras/chessbot
Python/MQTT software, Raspberry Pi Config files, PCB Schematics for an autonomous chess playing robot


bamnet/village
I have a collection of 1-2 dozen Department 56 lighted Christmas houses. The default lighting solution has a big problem though: a house is either lit or not.


polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
It measures 240 × 12 mm and has 2 copper layers, 1.6 mm thick.
78 parts, built around the WS2814F and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ut-ras/chessbot repository on GitHub, at the commit this page was made from: the board is hardware/chessboard/chessboard2.kicad_pcb and its schematic hardware/chessboard-bus/chessboard5-bus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ut-ras before reusing the design.