

DemonEye
- Size
- 16 × 35.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 48
- Pads
- 135
- Tracks, vias
- 228, 1
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 May 2026
- Updated
- 26 Jul 2026
Overview
DemonEye is an open-source printed circuit board by rhkean, from the rhkean/kicad_DemonEye repository on GitHub. It is a 2-layer board of 16 × 35.2 mm with 35 parts on 48 nets, routed with 228 tracks and 1 via.
It is built around the BCR421UFDQ, WS2814F and TPL8051ADQ-DFCR-S, with the CSD25501F3, AF0201FR-0710RL and QLSP06RGBXWAJ among its other parts. Its parts include 11 resistors, 9 diodes, 6 ICs, 5 transistors and 3 capacitors.
Main components
12BCR421UFDQ
UDFN-6-EP(2x2)-55℃~+150℃ 1 10% 350mA 40V External Over-Temperature Protection (OTP) PWM UDFN-6-EP(2x2) LED Drivers ROHSDiodes IncorporatedLED DriversWS2814F
FSOP-8-40℃~+85℃ 16.5mA 20V 3.7V~5.3V 4 PWM FSOP-8 LED Drivers ROHSWorldsemiLED DriversTPL8051ADQ-DFCR-S
DFN-8(3x3)-40℃~+125℃ 1 1.215V~21V 42V 450mA 50dB@(1MHz) 5uA 700mV Adjustable Over Current Protection、Over Temperature Protection Positive DFN-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS3PEAKUncategorisedCSD25501F3
LGA-3(0.6x0.7)-55℃~+150℃ 1 P-Channel 1.02nC@4.5V 120mΩ@1.8V 20V 3.6A 385pF 4.1pF 500mW 750mV 91pF P-Channel LGA-3(0.6x0.7) MOSFETs ROHSTexas InstrumentsMOSFETsAF0201FR-0710RL
0201-100ppm/℃~+350ppm/℃ -55℃~+155℃ 10Ω 25V 50mW Thick Film Resistor ±1% 0201 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountQLSP06RGBXWAJ
SMD,3.0x3.0mm-40℃~+120℃ 120° 2.2V、3.2V 350mA 3mm Round Lens 4480K~6970K 450nm~460nm、520nm~530nm、620nm~630nm 5W Discrete Diode Red, Emerald Green, Blue, White SMD3030-2P LED Indication - Discrete ROHSQuelightingLED Indication - DiscreteD15V0H1U2LP-7B
X1-DFN1006-21 100nA 12A@8/20us 15V 19V 27V 300W@8/20us 70pF IEC 61000-4-2 TVS Unidirectional X1-DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)AC0603FR-070RL
0603-55℃~+155℃ 0Ω 100mW 75V Thick Film Resistor ±1% 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountAC0201FR-0710KL
0201-55℃~+155℃ 10kΩ 25V 50mW Thick Film Resistor ±1% ±200ppm/℃ 0201 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountAC0201FR-072K7L
0201-55℃~+155℃ 2.7kΩ 25V 50mW Thick Film Resistor ±1% ±200ppm/℃ 0201 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountAC0402FR-0733RL
0402-55℃~+155℃ 33Ω 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface Mount0201WMF8872TEE
0201-55℃~+155℃ 25V 50mW 88.7kΩ Thick Film Resistor ±1% ±200ppm/℃ 0201 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | CSD25501F3 | My Package_Leadless:Texas_PICOSTAR-YJN_0.7x0.6mm_PicoStar | Q1, Q2, Q3, Q4, Q5 |
| 4 | 10R | My Resistors:R_0201_Dense | R4, R5, R6, R7 |
| 4 | BCR421UFDQ | DemonEye_Footprints:BCR421UFDQ | U3, U4, U5, U6 |
| 3 | QLSP06RGBXWAJ | Personal_FootprintLibrary:QLSP06RGBXWAJ | LED1, LED2, LED3 |
| 2 | 10uF | My Capacitors:C_0805_Nominal | C2, C4 |
| 2 | ESD | My Package_Leadless:DFN1006-2 | D3, D4 |
| 2 | TVS | My Package_Leadless:DFN1006-2 | D1, D2 |
| 1 | 0.1uF | My Capacitors:C_0201_Nominal | C1 |
| 1 | 0R | My Resistors:R_0603_Nominal | R3 |
| 1 | 10k | My Resistors:R_0201_Dense | R9 |
| 1 | 10k | My Resistors:R_0201_Nominal | R10 |
| 1 | 16V | My Package_Leadless:DFN1006-2 | D6 |
| 1 | 200R | My Resistors:R_0402_Nominal | R11 |
| 1 | 2k7 | My Resistors:R_0201_Dense | R1 |
| 1 | 33R | My Resistors:R_0402_Nominal | R2 |
| 1 | 88k7 | My Resistors:R_0201_Dense | R8 |
| 1 | D_Schottky_Small_Filled | My Package_Leadless:DFN1006-2 | D5 |
| 1 | PicoBlade 1x06 P1.25mm | My Connectors:Molex_PicoBlade_53261-0671_1x06_P1.25mm_Horizontal_SMD | CN1 |
| 1 | TPL8051Q | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U2 |
| 1 | WS2814F | My Package_SO:FSOP-8_3.25x1.65mm_P0.8mm | U1 |
Similar boards
- 2 layers312.7 × 85.8 mm

- 4 layers80 × 60 mm

Bytebeam ble can
Atif6894/automotive-ble-can-pcb
A small 4-layer board that sits on a vehicle's 12/24 V harness, talks CAN FD through a TCAN4550-Q1, and exposes it over Bluetooth LE through a CC2340R5-Q1.
153 parts - 6 layers31 × 30 mm

- 2 layers130.6 × 162.4 mm

Zerowriter Inkplate 5 Gen2
zerowriter/zerowriter_ink
General repo for all things Zerowriter Ink
656 parts46GPL-3.0 - 2 layers55.6 × 55.8 mm

- 4 layers36.8 × 35.6 mm

- 2 layers163 × 12 mm

- 2 layers240 × 12 mm

Chessboard2
ut-ras/chessbot
Python/MQTT software, Raspberry Pi Config files, PCB Schematics for an autonomous chess playing robot
78 parts7
Questions
How big is the DemonEye PCB?
It measures 16 × 35.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DemonEye use?
35 parts, built around the BCR421UFDQ, WS2814F, TPL8051ADQ-DFCR-S and CSD25501F3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DemonEye KiCad files?
From the rhkean/kicad_DemonEye repository on GitHub, at the commit this page was made from: the board is DemonEye.kicad_pcb and its schematic DemonEye.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DemonEye design in my own project?
Its repository states no licence, so its author keeps all rights: ask rhkean before reusing the design.