Skip to the content
2 layers22 × 37 mmTinyLora102, the printed circuit board in 3D

A LoRa Extension for a TTGO Mini E-Paper Core

Size
22 × 37 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
37
Pads
117
Tracks, vias
237, 26
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Apr 2024
Updated
21 Apr 2024

Overview

TinyLora102 is an open-source printed circuit board by Uspizig, from the Uspizig/TinyLoRaEink repository on GitHub. It is a 2-layer board of 22 × 37 mm with 32 parts on 37 nets, routed with 237 tracks and 26 vias.

It is built around the PAM8403, MBR0530 and RFM95W-868S2, with the WS2812B among its other parts. Its parts include 8 resistors, 7 capacitors, 6 diodes and 6 connectors. It belongs with the lEDs and displays and radio and wireless boards of this library.

Main components

4

README

readme.md

This is a Lora Shield for the Lilygo Mini Epaper Core 1.05". With this shield you may enable LoRa Communication, Chirpstack or stupid Helium on a Lilygo Mini Epaper Core ESP32 (Not the S3 for now)

In the Attached folder you may find

Schematic(PDF) Gerber Files(Zip File) Demofiles for reading out a Bresser Weather Station Changes in the SW for https://github.com/mcci-catena/arduino-lmic You may change the following lines in the SW of Arduino-LMIC: To do this Change in the folder Arduino\libraries\arduino-lmic-master\src\hal the File hal.cpp the function "static void hal_spi_init to": static void hal_spi_init () { //SPI.begin();//Comment Uspizig Original und WEMOS D1 //SPI.begin(lmic_pins.sck, lmic_pins.miso, lmic_pins.mosi, lmic_pins_cs); //sck, miso, mosi, cs SPI.begin(23, 22, 19, 33);//Comment Uspizig M5Matrix Lora Modul }

Part List/BOM: SMD-Stiftleiste: SMD RM2.54 z.B. https://www.conrad.de/de/p/fischer-elektronik-stiftleiste-standard-anzahl-reihen-1-polzahl-je-reihe-20-sl-10-smd-062-20-z-1-st-739077.html

MBR0530-SOD123: D1, D2, D3 -> Anode towards RFM95 DIO0, DIO1, DIO2 Kathode direction to D4, R1 https://www.conrad.de/de/p/mbr-0530-t1g-diode-schottky-smd-0-5a-30v-sod123-inhalt-50-stueck-800112525.html

0805 Resistor 4k7 or 10k or 1k PullDown Resistor-> R2 Choose whatever you have availible in Kohm.

RFM95 Lora TTN Module: https://www.conrad.de/de/p/rfm95w-868-s2-lora-module-868mhz-20-123dbm-300kbps-1-8-3-7v-800167586.html

Wire as a Antenna L = 3 x 10^8 m/s : 868 MHz : 4 = 86,3 mm

Optional: C1 100nF 0805 C2 1µF 0805

Parts

32
QtyValueFootprintReferences
510KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R5, R6, R7, R8
4MBR0530Diode_SMD:D_SOD-123D1, D2, D3, D4
3CCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C5
3RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR2, R3, R4
20.47uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC3, C4
222uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6, C7
2Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J5
1Antenna_ShieldConnector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMountAE1
1Conn_01x01_MaleTestPoint:TestPoint_Pad_2.5x2.5mmJ2
1Conn_01x02_FemaleConnector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_HorizontalJe
1Conn_01x07_MaleConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1LeftJ3
1Conn_01x08_FemaleConnector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_VerticalJ6
1Conn_01x08_MaleConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1LeftJ4
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD6
1PAM8403Package_SO:SOP-16_4.55x10.3mm_P1.27mmPAM8403
1RFM95W-868S2tp4056:HOPERF_RFM9XW_SMD_3DRFM95
1TestPointSymbol:baerkleinTP1
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD5

Similar boards

  • 2 layers25.9 × 44.2 mmM5StampC3, the printed circuit board in 3D

    M5StampC3

    Uspizig/M5StampC3-EINK

    Eink Board Addon for M5Stack Stamp C3 for Eink Waveshare Displays

    38 parts4
  • 2 layers44.5 × 31.7 mmS3Basic, the printed circuit board in 3D

    S3Basic

    Uspizig/BTSpeaker

    Small replacement PCB for a BT Speaker

    103 parts
  • 2 layers65.4 × 68 mmS3-27-epaper touch, the printed circuit board in 3D

    S3-27-epaper touch

    Uspizig/WifiWallSwitch

    A WallSwitch with a clever EINK Display that measures your Air Quality, measures Temperature, detects movement, measures Light Conditions... and many more.

    159 parts4
  • 2 layers79.2 × 68.8 mmEnvironment slave, the printed circuit board in 3D

    Environment slave

    pcbcupid/Lora-Wireless-Sensor-Network

    A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!

    72 parts30MIT
  • 2 layers90.1 × 45.1 mmLora node rfm95 minipro, the printed circuit board in 3D

    Lora node rfm95 minipro

    akirasan/LoRaWAN-tracker-TTNmapper

    Tracker basado en Arduino + GPS + RFM95W (LoRa)

    27 parts14GPL-3.0
  • 2 layers25 × 27.5 mmEsp32PicoD4, the printed circuit board in 3D

    Esp32PicoD4

    Uspizig/Bresser_Weather_NEW

    Arduino/ESP32 Sketch for a CC101 Receiver 868.3MHz to Decode Weather Data of a Bresser 5in1 Weather Station(2022)

    34 parts4GPL-3.0
  • 4 layers97 × 97.4 mmQEdge UI, the printed circuit board in 3D

    QEdge UI

    qinno/qEdge-UI

    qedge+ is the industry's low power design alternative to the standard PC approach. qEdge-UI is part of qEdge+ and consists of a RaspBerry Pico with LCD, touch screen and keys and an 868MHz LoRa radio module.

    170 parts3
  • 2 layers50 × 50.5 mmGSRadioBoard, the printed circuit board in 3D

    GSRadioBoard

    EPFLRocketTeam/2024_C_GS_RadioBoardSchematics

    This repository holds all the kicad schematics required for the radioboards

    18 parts1

Questions

How big is the TinyLora102 PCB?

It measures 22 × 37 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TinyLora102 use?

32 parts, built around the PAM8403, MBR0530, RFM95W-868S2 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TinyLora102 KiCad files?

From the Uspizig/TinyLoRaEink repository on GitHub, at the commit this page was made from: the board is TinyLora102/TinyLora102.kicad_pcb and its schematic TinyLora102/TinyLora102.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TinyLora102 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Uspizig before reusing the design.