
MARS Micromouse
uqmars/starter-micromouse
A starter bot design to serve as a starting point for our Micromouse competition.

A starter bot design to serve as a starting point for our Micromouse competition.
MARS Micromouse is an open-source printed circuit board by uqmars, from the uqmars/starter-micromouse repository on GitHub, published under the MIT licence. It is a 2-layer board of 77 × 65.5 mm with 43 parts on 51 nets, routed with 193 tracks and 37 vias.
It is built around the BQ25185DLHR and SL2301S. Its parts include 9 capacitors, 9 connectors, 8 resistors, 3 ICs and 3 diodes. It belongs with the RP2040 boards of this library.
Micromouse pcb designed for the UQ MARS micromouse workshop series.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C6, C9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 3 | 330R | Resistor_SMD:R_0603_1608Metric | R1, R2, R7 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 2.2uf | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C4, C5 |
| 2 | Conn_01x06_Socket | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J4, J5 |
| 2 | DRV8210DRLR | Package_TO_SOT_SMD:SOT-563 | U1, U2 |
| 2 | SW_MEC_5E | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C8 |
| 1 | 1uf | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C7 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | BQ25185DLHR | Library:WSON10_DLH_TEX | U3 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J9 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | IR1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | IR2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | IR3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SL2301S | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_SPDT | Library:SLW-1678105-6A-N-D | SW3 |

uqmars/starter-micromouse
A starter bot design to serve as a starting point for our Micromouse competition.

riku-ohyea/EMEC-micromouse
Micrmouse team documents, code, and files

FelixStA52/BRACHIOSAURUS
Boxed Recorder Analyzing Change in Height of Ice with On Site Accelerometer and Ultrasonic Readers Utilizing Support (BRACHIOSAURUS)



protolux-electronics/soleil_hardware
Hardware design files for Soleil, an open source power management and sleep control board for Raspberry Pi


jfwoods/insta360link-controller
A lightweight daemon, CLI tool, and (optional) firmware + hardware for controlling an Insta360 Link webcam without the first-party software.

It measures 77 × 65.5 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the BQ25185DLHR and SL2301S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the uqmars/starter-micromouse repository on GitHub, at the commit this page was made from: the board is PCB V2 Design/MARS_Micromouse.kicad_pcb and its schematic PCB Design/MARS_Micromouse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).