
PCB Design PFE
khawlahhouki/fatigue-detection-edge-ai
Real-time physical fatigue detection using Edge AI on STM32H7 with FreeRTOS, biosignal acquisition (PPG, EMG, IMU) and TFLite INT8 inference

Upside Down Lab's ADS1292R breakout board for ECG & Respiration.
Ads1292r is an open-source printed circuit board by upsidedownlabs, from the upsidedownlabs/ADS1292R-Breakout repository on GitHub. It is a 2-layer board of 35.6 × 27.5 mm with 44 parts on 40 nets, routed with 344 tracks and 22 vias.
It is built around the ADS1292RIPBS, TLV7163318PDPQR and BAV99. Its parts include 19 capacitors, 9 resistors, 5 diodes, 3 connectors and 2 ICs. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Upside Down Lab's ADS1292R breakout board for 2ch ECG + 1ch Respiration.




CERN Open Hardware License Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0).
MIT open source license.

This work is licensed under a Creative Commons Attribution 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C10, C11, C16 |
| 4 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C12, C13 |
| 4 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C14, C17 |
| 4 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D2, D3, D4, D5 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 2 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C9, C15 |
| 2 | 4.7nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19 |
| 2 | 40K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7 |
| 2 | 51K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2 |
| 1 | 1.5nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | ADS1292RIPBS | udlabs:ADS1292RIPBS | IC1 |
| 1 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10_Male | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LOGO | udlabs:udlabs_21.1x4.4_fs | G*** |
| 1 | LOGO | udlabs:udlabs_torso_2lead_ECG | G*** |
| 1 | LOGO | udlabs:udlabs_6.0x4.5_LOGO_fs | G*** |
| 1 | TLV7163318PDPQR | udlabs:S-PX2SON-N6 | U1 |
The 43 most common of 44 parts.

khawlahhouki/fatigue-detection-edge-ai
Real-time physical fatigue detection using Edge AI on STM32H7 with FreeRTOS, biosignal acquisition (PPG, EMG, IMU) and TFLite INT8 inference

Triksha-health/Hardware
Contains KiCAD files of all the PCB Boards for the Health Tracker System


magkopian/raspberry-pi-compute-module-base-board
Base board for the Raspberry Pi Compute Module




BoltzRnD/SmartPrintCoreH7x
STM32H7 based Robust and Open Source 3D Printer Mainboard
It measures 35.6 × 27.5 mm and has 2 copper layers, 1.6 mm thick.
44 parts, built around the ADS1292RIPBS, TLV7163318PDPQR and BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the upsidedownlabs/ADS1292R-Breakout repository on GitHub, at the commit this page was made from: the board is ADS1292RIPBS/ads1292r.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask upsidedownlabs before reusing the design.