Skip to the content
2 layers59.7 × 71.1 mmHigh Tech Fidget Spinner, the printed circuit board in 3D

High Tech Fidget Spinner

UpsidedownFalcon/IMU-Turntable3

Open source IMU turntable research project

Size
59.7 × 71.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
95
Pads
149
Tracks, vias
115, 11
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 May 2025
Updated
4 Jan 2026

Overview

High Tech Fidget Spinner is an open-source printed circuit board by UpsidedownFalcon, from the UpsidedownFalcon/IMU-Turntable repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.7 × 71.1 mm with 12 parts on 95 nets, routed with 115 tracks and 11 vias.

It is built around the TEENSY 4.1. Its parts include 8 connectors and 4 ICs. It belongs with the sensors and measurement boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

1

README

README.md

High-Tech Fidget Spinner: 3-Axis IMU Turntable

Welcome!

This is an open-source project for the construction of a 3-DoF IMU turntable, called the "High-Tech Fidget Spinner". It is a low-cost alternative to commercial solutions which can cost in the 5 to 6-figure USD range, to be used for the validation and characterisation of IMU sensors.

015_Tease2 System Architecture

The repository contains supporting files to the conference paper titled "High-Tech Fidget Spinner: Open-Source 3-Axis Turntable" from UbiComp Companion ’25, October 12–16, 2025, Espoo, Finland: https://doi.org/10.1145/3714394.3756256

The top-level strucutre of the repository is as follows:

text
.
├── build/              # 3D-printing files, instructions and BoM to construct the hardware    
├── docs/               # Project development and conference paper documentation 
├── src/                # Code for the webapp and controller firmware    
├── testing/            # Files from testing the High-Tech Fidget Spinner 
├── tools/              # Files to select approrpriate stepper motors 
├── LICENSE.md         
└── README.md           

Each directory has its own README file that contains further details about it.

Getting started

  1. Familiarise yoursel with the directories in this repository and their README files and the overview paper at https://doi.org/10.1145/3714394.3756256

  2. Construct the hardware as described in /build/

  3. Upload the firmware as described in /src/

  4. Launch the webapp as described in /src/

  5. You're ready to use the project! Usage instructions can be found at /docs/how-to-use.md

  6. Modify as you need for your applications :)

Next steps

The High-Tech Fidget Spinner is a WORK IN PROGRESS as of August 3, 2025. The community should follows this repository for the latest iterations.

  • A FORK of this repository should be created to modify the project for your bespoke applicaiton.

  • An ISSUE should be created to suggest changes / bug fixes for the entire community.

Everyone is welcome to use, collaborate and iterate on this project!

Parts

12
QtyValueFootprintReferences
1+24VConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1+5VConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Rotary Encoder_XConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6
1Rotary Encoder_YConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1Rotary Encoder_ZConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1Stepper Motor_XConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Stepper Motor_YConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Stepper Motor_ZConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1TMC2209_XTMC2209:TMC2209U2
1TMC2209_YTMC2209:TMC2209U3
1TMC2209_ZTMC2209:TMC2209U4
1Teensy4.1Teensy41:Teensy41U1

Similar boards

  • 2 layers118.1 × 101.6 mmTeensy eurorack, the printed circuit board in 3D

    Teensy eurorack

    newdigate/teensy-eurorack

    Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

    102 parts259MIT
  • 2 layers240 × 240 mmKfchess, the printed circuit board in 3D

    Kfchess

    misprit7/real-time-chess

    A physical chess board without the concept of turns

    235 parts254MIT
  • 2 layers304.8 × 170.8 mm00Key, the printed circuit board in 3D

    00Key

    ZeroZeroOne-dev/00Key

    00Key a 75% keyboard

    268 parts241GPL-3.0
  • 2 layers66.5 × 36.5 mmSyncBoard, the printed circuit board in 3D

    SyncBoard

    anthonytec2/OctoSense

    OctoSense is a multimodal dataset

    9 parts211MIT
  • 2 layers312 × 140 mmTsynth2 Rev1.3, the printed circuit board in 3D

    Tsynth2 Rev1.3

    Electrotechnique/TSynth-Teensy4.1

    TSynth for Teensy 4.1

    108 parts182
  • 2 layers316 × 119 mmTeensy Grovebox, the printed circuit board in 3D

    Teensy Grovebox

    jerry20091103/Teensy_Grovebox

    A portable synth and music multi-tool made with Teensy 4.1

    142 parts150MIT
  • 2 layers304.8 × 95.2 mmLMN, the printed circuit board in 3D

    LMN

    FundamentalFrequency/LMN-3-ECAD

    Electrical CAD Files for the LMN-3 Project

    106 parts106CC-BY-SA-4.0
  • 2 layersT41-Main+RF board V012, the printed circuit board in 3D

    T41-Main+RF board V012

    DRWJSCHMIDT/T41

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    255 parts66

Questions

How big is the High Tech Fidget Spinner PCB?

It measures 59.7 × 71.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the High Tech Fidget Spinner use?

12 parts, built around the TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the High Tech Fidget Spinner KiCad files?

From the UpsidedownFalcon/IMU-Turntable repository on GitHub, at the commit this page was made from: the board is build/PCB/kicad/High Tech Fidget Spinner.kicad_pcb and its schematic build/PCB/kicad/High Tech Fidget Spinner.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the High Tech Fidget Spinner design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).