Skip to the content
2 layers27 × 60 mmCore board, the printed circuit board in 3D

An experimental flight controller/altimeter board family developed by UNL Aerospace Rocketry

Size
27 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
56
Pads
164
Tracks, vias
253, 33
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Aug 2024
Updated
27 Nov 2024

Overview

Core board is an open-source printed circuit board by unl-rocketry, from the unl-rocketry/flight-computer repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 27 × 60 mm with 39 parts on 56 nets, routed with 253 tracks and 33 vias.

It is built around the BME280, TPS62172DSG and CPC1002N, with the BNO055 among its other parts. Its parts include 11 resistors, 7 connectors, 6 ICs, 3 capacitors and 2 diodes.

Main components

4

README

README.md

Flight Computer

A versatile, inexpensive, modular, and open source flight computer and altimeter system for amateur and experimental rocketry.

All designs in this repository are licensed under the CERN-OHL-S v2 or any later version. Contributions are welcome!

Core Board

This design should be capable of using input voltages from 3v → 16v on the battery input to allow for a wide range of batteries to be used. It is designed to control and independently fire up to 3 individual high power in-flight events (eg. ejection charges).

Built-in Sensors

The sensor package includes a Bosch BNO055 motion co-processor for acceleration, magnetic heading, and 3d orientation. It also includes a Bosch BME280 sensor for pressure (along with altitude), temperature, and humidity measurements. These sensor measurements can be used for flight control, and can also be logged to a MicroSD card mounted on the board for ease of data recovery.

Toolchain Support

All programmable components of this board were selected to be compatible with Rust-based microcontroller frameworks like Embassy, for ease of programming and future extension of software capabilities.

Images

front

back

Expansion Modules

A major feature of the Core Board is the ability to be expanded by connecting via an I2C (and hopefully in the future CAN Bus) connection to other boards and sensors with the same connectors. These expansion boards could provide additional capabilities while being modular for quickly swapping and replacing parts.

The connectors on the Core Board are compatible with any Adafruit Stemma QT or SparkFun Qwiic board, which immediately provides for a lot of options for sensors without any design or soldering work needed.

In the future, this repository will host the KiCad files for expansion boards created by UNL Aerospace Rocketry.

Parts

39
QtyValueFootprintReferences
84.4kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5, R7, R10, R11
4MountingHoleMountingHole:MountingHole_2.2mm_M2_ISO7380_PadH1, H2, H3, H4
310kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R8, R9
3CPC1002NPackage_SO:SOP-4_3.8x4.1mm_P2.54mmU1, U2, U3
222pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2
2Conn_01x13_SocketConnector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_VerticalJ1, J2
2LOGOLOGOG***, G***
10.1µFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3
110µFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderf1
12.2µHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL1
132.768kHzCrystal:Crystal_SMD_G8-2Pin_3.2x1.5mm_HandSolderingY1
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU4
1BNO055Package_LGA:LGA-28_5.2x3.8mm_P0.5mmU5
1BatteryJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP1
1Battery InputConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ5
1Connector 1G2Custom:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical-CUSTOMJ7
1Connector 2G2Custom:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical-CUSTOMJ8
1DDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1
1Ignitor OutputTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_HorizontalJ3
1LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2
1Micro_SD_CardConnector_Card:microSD_HC_Hirose_DM3D-SFJ4
1TPS62172DSGPackage_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalViasU6

Similar boards

  • 2 layers133.4 × 97.8 mmSmartIOv3.3, the printed circuit board in 3D

    SmartIOv3.3

    igg-iot/BBD9000

    Automated Biodiesel Dispensing Kiosk and Coop Management Software - A Free Software and Hardware Project

    126 parts2
  • 2 layers114.8 × 68.6 mmLight controller, the printed circuit board in 3D

    Light controller

    cmumford/light-controller

    Test PCB to control an array of lights

    38 parts1MIT
  • 4 layers39 × 85 mmBLDC 4, the printed circuit board in 3D

    BLDC 4

    FrogFairy/bldc-hardware

    Brushless DC Motor controller from Benjamin Vedder

    165 parts
  • 4 layers67 × 140.3 mmUnkey, the printed circuit board in 3D

    Unkey

    natecermak/unkey

    Swimmie-Textie

    139 parts
  • 2 layers94 × 94 mmUsb2most, the printed circuit board in 3D

    Usb2most

    smartgauges/usb2most

    USB to MOST adapter

    124 parts26GPL-3.0

Questions

How big is the Core board PCB?

It measures 27 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Core board use?

39 parts, built around the BME280, TPS62172DSG, CPC1002N and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Core board KiCad files?

From the unl-rocketry/flight-computer repository on GitHub, at the commit this page was made from: the board is core_board/core_board.kicad_pcb and its schematic core_board/core_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Core board design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).