Skip to the content
2 layers32.5 × 13.5 mmDisplay, the printed circuit board in 3D

The schematic and PCBs of the UHK 60 v1

Size
32.5 × 13.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
10
Pads
33
Tracks, vias
108, 9
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Dec 2015
Updated
10 Apr 2022

Overview

Display is an open-source printed circuit board by UltimateHackingKeyboard, from the UltimateHackingKeyboard/uhk60v1-electronics repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 32.5 × 13.5 mm with 14 parts on 10 nets, routed with 108 tracks and 9 vias.

It belongs with the lEDs and displays boards of this library.

README

README.md

Ultimate Hacking Keyboard electronics

Changelog #186

Contained are the schematics and board layout KiCad files for the Ultimate Hacking Keyboard.

Please make sure to clone this repo with:

git clone --recursive https://github.com/UltimateHackingKeyboard/uhk60v1-electronics.git

Now, you should be able to open any of the 4 KiCad projects of the repo:

  • left-main contains main PCB of left keyboard half.
  • right-main contains the main PCB of the right keyboard half.
  • display contains the PCB that interfaces our custom manufactured LED segment display with the left main PCB.
  • connectors are very small PCBs that are soldered vertically to the left and right main circuit boards to interconnect the keyboard halves without needing a bridge cable.

Parts

14
QtyValueFootprintReferences
2FIDUCIALInput_Club:FIDFID1, FID2
151281-1094UGL:FFC_Connector_51281-1094P1
1CB1UGL:Test_PointTP_CB1
1CB2UGL:Test_PointTP_CB2
1CB3UGL:Test_PointTP_CB3
1CB4UGL:Test_PointTP_CB4
1CB5UGL:Test_PointTP_CB5
1CB6UGL:Test_PointTP_CB6
1CB7UGL:Test_PointTP_CB7
1CB8UGL:Test_PointTP_CB8
1CB9UGL:Test_PointTP_CB9
1CONN_9UGL:UHK_LED_displayP2
1GNDUGL:Test_PointTP_GND1

More from UltimateHackingKeyboard/uhk60v1-electronics

3
  • 2 layers150.1 × 123.4 mmRight main, the printed circuit board in 3D

    Right main

    UltimateHackingKeyboard/uhk60v1-electronics

    The schematic and PCBs of the UHK 60 v1

    285 parts177GPL-3.0
  • 2 layers135.9 × 123.4 mmLeft main, the printed circuit board in 3D

    Left main

    UltimateHackingKeyboard/uhk60v1-electronics

    The schematic and PCBs of the UHK 60 v1

    243 parts177GPL-3.0
  • 2 layers42.3 × 4.8 mmConnectors, the printed circuit board in 3D

    Connectors

    UltimateHackingKeyboard/uhk60v1-electronics

    The schematic and PCBs of the UHK 60 v1

    20 parts177GPL-3.0

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Display PCB?

It measures 32.5 × 13.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Display use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Display KiCad files?

From the UltimateHackingKeyboard/uhk60v1-electronics repository on GitHub, at the commit this page was made from: the board is display/display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Display design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).