2 layers15.1 × 26.4 mm
ME2-CH2O-16×15 breakout
uf-mil-electrical/misc_hardware
PCB stuff that doesn't belong to any specific robot
8 parts1
2 layers40.4 × 20.8 mm
PCB stuff that doesn't belong to any specific robot
- Size
- 40.4 × 20.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 17
- Pads
- 67
- Tracks, vias
- 159, 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Sep 2025
- Updated
- 2 Nov 2026
Overview
ME3-H2 is an open-source printed circuit board by uf-mil-electrical, from the uf-mil-electrical/misc_hardware repository on GitHub. It is a 2-layer board of 40.4 × 20.8 mm with 25 parts on 17 nets, routed with 159 tracks and 7 vias.
It is built around the LM27761DSG. Its parts include 9 capacitors, 9 resistors, 4 ICs, 1 transistor and 1 connector.
Main components
1README
README.mdmisc_hardware
PCB stuff that doesn't belong to any specific robot
Projects by type:
Communication
- [Peter Feng] MCP2515 CAN Bus Module Testing
LEDs
- [Erik Neff-Flahan] 8x8 Neopixel Matrix V1
- [Russell MacGregor] 8x8 Neopixel Matrix V2
- [Russell MacGregor] Neopixel Breakout Board
- [Erik Neff-Flahan] Neopixel RP2350 C Library
Logic
- [Russell MacGregor] Level Shifter Breakout V1
Navigation
- [Russell MacGregor] IMU Test Board V1 (incomplete)
Power
- [Russell MacGregor] 3V3 1.5A Regulator Breakout
- [Russell MacGregor] Battery ORing Test Board V1
- [Erik Neff-Flahan] RobotX Buoy Board Power Setup
- [Russell MacGregor] Inductor Breakout V1
- [Russell MacGregor] MAX20408 Breakout V1
- [Russell MacGregor] TPS26631 E-Fuse Breakout V1
RobotX2026
- [Aiden Shepler] Task 2 Props (underwater LEDs)
Sensing
- [Russell MacGregor] Air Quality Monitor V1
- [Russell MacGregor] Atmospheric Monitor V1
- [Russell MacGregor] Door Sensor V3
USB
- [Russell MacGregor] USB 2.0 Hub Breakout V4
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C8, C9 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R7, R8 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C6 |
| 2 | LT6003HS5TRPBF | LT6003:LT-S5-5-TSOT-23_N | U1, U2 |
| 1 | -5V | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 158k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 47 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 51k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LM27761 | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U4 |
| 1 | ME3-H2 | ME3-H2:ME3-H2 | U3 |
| 1 | PJFET | Package_TO_SOT_THT:TO-92 | Q1 |
More from uf-mil-electrical/misc_hardware
3- 2 layers30.5 × 20.3 mm
- 2 layers27 × 19 mm
MQ-3B breakout
uf-mil-electrical/misc_hardware
PCB stuff that doesn't belong to any specific robot
3 parts1
Similar boards
- 6 layers122.5 × 103.5 mm
- 4 layers70 × 72 mm
- 4 layers129.5 × 52.3 mm
- 8 layers124 × 190 mm
Freesample
azonenberg/freesample
High performance sampling oscilloscope based on INTEGRALSTICK
577 parts10BSD-3-Clause - 4 layers60 × 40 mm
Ftx
SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below
153 parts5 - 4 layers85.6 × 54 mm
Jammer Front End
adrianiaz/Jammer_Front_End
Design of a switched and tunable RF preselector that selects bands within 2-18 GHz for direct-sampling receiver applications..
116 parts1 - 4 layers100 × 60 mm
Simple just sensor
williamlin108/USAYPT2026_FlashSensor_MLWGS
10kHz cutoff bandwidth; TO-5 Package Si-photodiode with TIA amplifier (G:2k)
78 parts1 - 2 layers22.6 × 13.4 mm
Inverter
zivbeh/pcb_inverter
This board uses two compact inverting converters: - One channel generates -5V - One channel generates -15V
16 parts1MIT
Questions
How big is the ME3-H2 PCB?
It measures 40.4 × 20.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ME3-H2 use?
25 parts, built around the LM27761DSG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ME3-H2 KiCad files?
From the uf-mil-electrical/misc_hardware repository on GitHub, at the commit this page was made from: the board is Sensing/Sensor_Breakouts/ME3-H2_breakout/ME3-H2.kicad_pcb and its schematic Sensing/Sensor_Breakouts/ME2-CH2O-16×15_breakout/ME2-CH2O-16×15_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ME3-H2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask uf-mil-electrical before reusing the design.