4 layers199 × 200 mm
Ultrasound shield 8mic
ShiegeChan/SensEdu
Ultrasonic Ranging & Detection Development Shield for Arduino GIGA R1
183 parts7GPL-3.0
2 layers71.1 × 53.3 mm
Pidaqv2
UCLA-Rocket-Project/daq-pcbDAQ PCB
- Size
- 71.1 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 42
- Pads
- 197
- Tracks, vias
- 291, 53
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 May 2020
- Updated
- 8 Dec 2020
Overview
Pidaqv2 is an open-source printed circuit board by UCLA-Rocket-Project, from the UCLA-Rocket-Project/daq-pcb repository on GitHub. It is a 2-layer board of 71.1 × 53.3 mm with 28 parts on 42 nets, routed with 291 tracks and 53 vias.
It is built around the ARDUINO UNO R3 and AD8426ACPZ-R7. Its parts include 16 capacitors, 5 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorised
AD8426ACPZ-R7
LFCSP-16(4x4)-18V~-1.35V、1.35V~18V -40℃~+125℃ 0.6V/us 1.5nA 13mA 1MHz 1V/V~1000V/V 2 2.2V~36V 200uV 20nA 24nV/√Hz@1kHz 25us 350uA 500nV/℃ 5pA/℃ 80dB 80dB External resistor gain、Overvoltage protection Rail-to-rail output LFCSP-16(4x4) Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation Amplifiers
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C206, C303, C306, C402, C404 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C202, C204, C205, C302, C304, C305 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H102, H103, H104 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C401, C403 |
| 2 | 4.7nF C0G | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C201, C301 |
| 2 | ADS1261BIRHBR | Package_DFN_QFN:Texas_S-PVQFN-N32_EP3.45x3.45mm | U201, U301 |
| 1 | AD8426ACPZ-R7 | footprints:AD8426ACPZ-R7 | U401 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A101 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J103 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J104 |
| 1 | Screw_Terminal_01x06 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-6_1x06_P2.54mm_Horizontal | J102 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-8_1x08_P2.54mm_Horizontal | J105 |
| 1 | Screw_Terminal_01x10 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_1-282834-0_1x10_P2.54mm_Horizontal | J101 |
Questions
How big is the Pidaqv2 PCB?
It measures 71.1 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pidaqv2 use?
28 parts, built around the ARDUINO UNO R3 and AD8426ACPZ-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pidaqv2 KiCad files?
From the UCLA-Rocket-Project/daq-pcb repository on GitHub, at the commit this page was made from: the board is pidaqv2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pidaqv2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask UCLA-Rocket-Project before reusing the design.
Similar boards
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0