

Spider Upper
- Size
- 63 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 121
- Pads
- 384
- Tracks, vias
- 1,235, 162
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Feb 2024
- Updated
- 11 Feb 2025
Overview
Spider Upper is an open-source printed circuit board by ucb-bar, from the ucb-bar/riskybear-PCB repository on GitHub. It is a 2-layer board of 63 × 63 mm with 74 parts on 121 nets, routed with 1,235 tracks and 162 vias.
It is built around the ESP32-C6-WROOM-1-N8, FT231XS-R and LM2675M-5.0, with the DNBT8105-7-HXY among its other parts. Its parts include 26 resistors, 17 capacitors, 9 connectors, 8 ICs and 5 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-C6-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesFT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB ConvertersLM2675M-5.0
SOIC-8-40℃~+125℃@(TJ) 1 1A 2.5mA 260kHz 5V 6.5V~40V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDNBT8105-7-HXY
SOT-23Bipolar (BJT)HXY MOSFET
README
README.mdriskybear-PCB
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C5, C10, C12, C14, C15, C16, C17 |
| 7 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R17, R19, R22, R23, R24 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R11, R20, R21, R25, R26 |
| 4 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R12, R13 |
| 4 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1, J2, J3, J4 |
| 4 | DNBT8105-7 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5 |
| 4 | SW_SPST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2, SW3, SW4 |
| 3 | 280 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15, R16 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C9 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J8, J9 |
| 2 | ESP32-C6-WROOM-1 | Espressif:ESP32-C6-WROOM-1 | U4, U7 |
| 2 | FT231XS | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U1, U3 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500 | J6, J7 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 47uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 68uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | D | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | LM2675M-5 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | ~ | Adafruit_Sensors:BNO055 | U2 |
| 1 | ~ | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm | U8 |
More from ucb-bar/riskybear-PCB
6- 4 layers72 × 72 mm

- 2 layers60 × 60 mm

- 4 layers72 × 72 mm

- 4 layers72 × 72 mm

- 2 layers68 × 68 mm

- 2 layers60 × 60 mm

Similar boards
- 6 layers100 × 100 mm

- 4 layers60 × 110 mm

- 4 layers158 × 95 mm

FHNW Pro4E FS19T8-3DPrinterBoard STM32
mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)
264 parts17GPL-3.0 - 4 layers60 × 60 mm

- 2 layers80 × 50 mm

Blitzortung AS3935
patkan/lightning-detector
Lightning Detector ethernet sensor node and server based on AS3935 - this project is discontinued
81 parts1GPL-2.0 - 4 layers88 × 136 mm

- 2 layers67.7 × 63.6 mm

- 2 layers76 × 82 mm

Questions
How big is the Spider Upper PCB?
It measures 63 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spider Upper use?
74 parts, built around the ESP32-C6-WROOM-1-N8, FT231XS-R, LM2675M-5.0 and DNBT8105-7-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spider Upper KiCad files?
From the ucb-bar/riskybear-PCB repository on GitHub, at the commit this page was made from: the board is riskybear_V1.0/ESP32C6_Controller/Spider_Upper/Spider_Upper.kicad_pcb and its schematic riskybear_V1.0/ESP32C6_Controller/Spider_Lower/Spider_Lower.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spider Upper design in my own project?
Its repository states no licence, so its author keeps all rights: ask ucb-bar before reusing the design.