2 layers114 × 57 mm
Carte puissance
INSA-GEI/insa-nxpcup
Dépôt du département GEI de l'INSA Toulouse pour la compétition NXPCup
63 parts9GPL-3.0
2 layers106.7 × 58.4 mm
ShiftControllerV2
UBCO-Motorsports/ShiftController2020- Size
- 106.7 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 18
- Pads
- 124
- Tracks, vias
- 86, 73
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Nov 2019
- Updated
- 16 Feb 2020
Overview
ShiftControllerV2 is an open-source printed circuit board by UBCO-Motorsports, from the UBCO-Motorsports/ShiftController2020 repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 106.7 × 58.4 mm with 26 parts on 18 nets, routed with 86 tracks and 73 vias.
It is built around the BTN8982TA. Its parts include 11 capacitors, 8 resistors, 2 transistors, 2 connectors and 1 IC.
Main components
1Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5, C6, C7 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R7, R8 |
| 4 | 220n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C9, C10, C11 |
| 4 | 510 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3 |
| 2 | BTN8982TA | Package_TO_SOT_SMD:TO-263-7_TabPin8 | Q1, Q2 |
| 2 | Conn_02x06_Top_Bottom | Lukas_Library:MX120G | J1, J2 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D12.5mm_P7.50mm | C1 |
| 1 | 30v zener | Diode_SMD:D_SOD-123 | D1 |
| 1 | ControllerBoardV1 | Lukas_Library:Breadboard_Center_32pin | U1 |
| 1 | LOGO | Lukas_Library:UBCOLogo | G*** |
Similar boards
- 2 layers66.8 × 42.4 mm
KiCad CAN motor driver
wjklimek1/CAN_motor_controller
H-bridge for DC motor controlled by CAN or PWM
78 parts7MIT - 2 layers50.3 × 45 mm
Titancore-7960 industrial
Glitch-Out-Hardware/TitanCore-7960
DIY Dual Channel Driver de Motores basado en BTS7960
36 parts3 - 2 layers140.3 × 89.3 mm
- 4 layers83.6 × 84.8 mm
Skateboard
86kkd/millionBoard
Amazing 500million sensor enetric skateboard use body center of gravity to control !!!
186 parts - 4 layers120 × 46 mm
TATAMI STM32-V2
AgustinPrietoValdez/competition-robots
Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.
115 partsMIT - 2 layers125 × 95 mm
Vanchor helm
AlexAsplund/vanchor-pcb
95×92 mm 2-layer board. Full H-bridge for a 12–24 V brushed trolling motor, controlled by the vanchor-helm board over one straight 8-wire cable. Two build variants share the same PCB:
69 parts - 4 layers80 × 120 mm
Questions
How big is the ShiftControllerV2 PCB?
It measures 106.7 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ShiftControllerV2 use?
26 parts, built around the BTN8982TA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ShiftControllerV2 KiCad files?
From the UBCO-Motorsports/ShiftController2020 repository on GitHub, at the commit this page was made from: the board is KiCad_Project/ShiftControllerV2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ShiftControllerV2 design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).