

Right
- Size
- 152.1 × 109.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 58
- Pads
- 247
- Tracks, vias
- 893, 123
- Pours
- 56
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Apr 2020
- Updated
- 3 Jun 2020
Overview
Right is an open-source printed circuit board by tzskp1, from the tzskp1/topre-ergo repository on GitHub. It is a 2-layer board of 152.1 × 109.3 mm with 67 parts on 58 nets, routed with 893 tracks and 123 vias.
It is built around the GS8051-TR, 74VHC4051AFT and ATMEGA32U4, with the PJ-327A and B3FS-1010P among its other parts. Its parts include 15 resistors, 6 capacitors, 4 ICs, 1 diode and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5GS8051-TR
SOT-23-5-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 150MHz 1pA 2.5V~5.5V 2.8mA 2mV 2pA 2uV/℃ 4.9nV/√Hz@1MHz 80dB 80mA 88V/us Enable/shutdown function Rail-to-rail output SOT-23-5 Operational Amplifier ROHSGainsilOperational Amplifier74VHC4051AFT
TSSOP-16-175mil-40℃~+125℃ 12ns 12ns 13.1pF 180MHz 24Ω 2V~5.5V 8 8:1 8ns Fault protection、Power-off isolation TSSOP-16-175mil Analog Switches, Multiplexers ROHSToshibaAnalog Switches, MultiplexersATMEGA32U4
UncategorisedUnknown makerPJ-327A
SMDUncategorisedXUNPUB3FS-1010P
SMD-4P,6.3x6mm-25℃~+70℃ 1N 24V 4.3mm 50mA 6.3mm 6mm Gull Wing Round Button SPST Surface Mount,Vertical SMD-4P,6.3x6mm Tactile Switches ROHSOmronTactile Switches
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | ToprePad | base:ToprePad | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +12 |
| 9 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 4 | 22k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R11, R12, R14, R15 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1A | Diode_SMD:D_PowerDI-123 | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1n | Resistor_SMD:R_0402_1005Metric | C1 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 270 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 500m | Fuse:Fuse_1210_3225Metric | F1 |
| 1 | 56k | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 74VHC4051AFT | base:TSSOP16 | U1 |
| 1 | ATMEGA32U4 | base:ATmega32U4 | U3 |
| 1 | B3FS-1010P | base:SW_B3FS-1010P | S1 |
| 1 | Crystal | base:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | GS8051-TR | lib:SOT-23-5 | U2 |
| 1 | PJ-327A | base:PJ-327A | U4 |
| 1 | Wurth-632723300011 | base:Wurth-632723300011-HandSoldering | USB1 |
Similar boards
- 4 layers96.5 × 39 mm

- 4 layers40.5 × 60 mm

Es8390-breakout
wemaxon/es8390-breakout
ES8390 Breakout Board with Class-D Amplifier, Line-Out/Headphone and Line-In
65 parts - 2 layers26.9 × 75.4 mm

- 2 layers43.4 × 75.3 mm

Coloryr
Coloryr/ColorAudio
通用耳放,目前支持: - 音乐播放 - MP3音频解码,信息显示 - FLAC音频解码,信息显示 - 蓝牙音频播放 - SBC编码 - AAC编码 - aptx编码(freeaptx解码库) - USB音频播放 - UAC1 (最大96K 32bit,只能设置一种采样大小) - UAV2 (最大192K 32bit,支持多种采样大小)
234 parts2GPL-3.0 - 2 layers30.8 × 46.9 mm

- 2 layers89 × 55.5 mm

Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
129 parts75CERN-OHL-W-2.0 - 2 layers90.2 × 66.5 mm

PyControl DSeries
Karpova-Lab/pyControl-D-Series-Breakout
A breakout board for use with pyControl behavior control framework
17 parts2 - 2 layers89 × 55.5 mm

Mintypcb
SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…
158 parts1
Questions
How big is the Right PCB?
It measures 152.1 × 109.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Right use?
67 parts, built around the GS8051-TR, 74VHC4051AFT, ATMEGA32U4 and PJ-327A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Right KiCad files?
From the tzskp1/topre-ergo repository on GitHub, at the commit this page was made from: the board is right.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Right design in my own project?
Its repository states no licence, so its author keeps all rights: ask tzskp1 before reusing the design.